SMNSMN High Precision Surface Mount 4 Resistor Network High Precision Surface Mount 4 Resistor Network Dual-In-Line Package with TCR Tracking 0.5 ppm/C, Tolerance Match of 0.01% and Ratio Stability of 0.005% FEATURES Temperature coefficient of resistance (TCR) (55C to +125C, +25C ref): - Absolute: 0.2 ppm/C typical (see Table 2) - Tracking: 0.5 ppm/C typical (see Table 2) Power rating (at 70C): - Entire package: 0.4 W - Each resistor: 0.1 W Resistance tolerance match: 0.01% Ratio stability: 0.005% (0.1 W at 70C, 2000 hours) Any value and any ratio available within resistance range Large variety of resistance ratios Electrostatic discharge (ESD) to 25 kV Short time overload: 0.0025% Non inductive, non capacitive design INTRODUCTION Rise time: 1 ns without ringing Bulk Metal Foil (BMF) Technology outperforms all other Current Noise: < 40 dB resistor technologies available today for applications that Thermal EMF: 0.05 V/C require high precision and high stability. Voltage coefficient <0.1 ppm/V This technology has been pioneered and developed Non inductive: <0.08 H by Vishay Foil Resistors, and products based on this technology are the most suitable for a wide range of Non hot spot design applications. Terminal finishes available: Lead (Pb)-free Tin/Lead alloy BMF technology allows us to produce Customer Orientated products designed to satisfy challenging and For better performances please contact us specific technical requirements. Available with Z-Foil technology, please see SMNZ datasheet. Model SMN offers low TCR (absolute and tracking), excellent load life stability, tight tolerance (absolute and match), excellent ratio stability, low thermal EMF, low APPLICATIONS current noise and low voltage coefficient - all in the same Instrumentation amplifiers resistor. Bridge networks The SMN Surface Mount Network is made up of 4 Differential amplifiers independent BMF resistors in a small standard molded Ratio arms in bridge circuits epoxy package with 50 MIL lead pitch (JEDEC MS-012 package). Medical and test equipment Military The electrical specification of this integrated construction R2 offers improved performance and better real estate Airborne, etc. utilization over discrete resistors and matched sets. The R1 V1 - resistor may be used independently or as divider pairs. Vout + V2 R1 Our Application Engineering Department is available to SMN R2 advise and make recommendations. For non-standard technical requirements and special applications, please contact us. contact us using the e-mail address in the footer below. Table 1Resistance Values and Tolerances (Tighter performances are available) * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. Resistance Values 100 10 k per resistor For example, parts with lead (Pb) terminations are not RoHS Absolute Tolerance Each Resistor 0.02%, 0.05%, 0.1% compliant. Please see the information/tables in this datasheet Resistance Tolerance Match 0.01%, 0.02%, 0.05% for details. Document No.: 63081Document No.: 63081 For any questions, contact www.vishayfoilresistors.com Revision: 22-Dec-2016Revision: 22-Dec-2016 foil vpgsensors.com 1SMN (1) Figure 1Schematics Figure 4Typical TCR Curve (for more details, see Table 2) 87 65 87 65 +150 +100 +50 R1 R1 R1 R1 R1 R2 R2 R1 0 12 34 12 34 50 OPTION 1 OPTION 2 100 FOUR RESISTORS, TWO RESISTOR PAIRS SAME OHMIC VALUE R1/R2 R2/R1 150 2 ppm/C (+25C reference) SAME ABSOLUTE TOLERANCE 200 50 25 0 +20 +50 +75 +100 +125 Note (1) 55 Different schematics are available (R1, R2, R3, R4). 1. Different schematics are available (R1, R2, R3, R4) Ambient Temperature (C) Figure 2Power Derating Curve Figure 5Trimming to Values (conceptual illustration) 110 100 Interloop capacitance 90 Current path reduction 80 before trimming in series 70 60 Mutual Current path after trimming 50 inductance 40 reduction Trimming process 30 due to change removes this material in current 20 from shorting strip area direction changing current path 10 and increasing 0 resistance - 60 - 40 - 20 0 20 40 60 80 100 120 140 55 70 125 Foil shown in black, etched spaces in white Ambient Temperature (C) Note To acquire a precision resistance value, the Bulk Metal Foil chip is trimmed by selectively removing built-in shorting bars. To increase the resistance in known increments, marked Figure 3Dimensions and Imprinting areas are cut, producing progressively smaller increases in Example in inches (millimeters) resistance. This method reduces the effect of hot spots and improves the long-term stability of Bulk Metal Foil resistors. 0.008 0.001 RATIO (0.20 0.025) TOLERANCE CODE 0.050 0.0165 0.0025 (0.42 0.064) (1.27) VALUE R1 Figure 6Land Pattern in inches (millimeters) VALUE R2 0.028 0.001 0.283 (7.19) SMN (0.71 0.025) Z +0.008 (0.2) (1) 10K Q 5K0 D V B0219 DATE 0.024 (0.61) X PIN NO. 1 IDENTIFIER CODE +0.008 (0.2) 0.197 0.005 PIN NO. 1 (5.00 0.13) 2 - 6 Z 0.095 (2.41) Y 0.068 0.005 0.008 (0.2) (1.73 0.13) 0.0075 0.0025 (0.191 0.064) Y Seating 0.050 (1.27) Plane E nominal Note (1) (1) If the If the rresistaesistance value of R1 and R2 contains mornce value of R1 and R2 contains more than 6 characters togethe than er, the VCODE EX will be printed instead (see Resistance Value Code List for Popular Ratios Table) followed by 6 characters together, the VCODE will be printed instead the ratio tolerance code 0.150 (3.81) (see Resistance Value Code List for Popular Ratios Table) D nominal followed by the ratio tolerance code www.vishayfoilresistors.com For any questions, contact Document No.: 63081 2 foil vpgsensors.com Revision: 22-Dec-2016 0.157 (3.99) Percent of Rated Wattage 0.239 0.005 (6.07 0.13) R (ppm) R