VSMP Series (0603, 0805, 1206, 1506, 2010, 2512) VSMP Series (0603, 0805, 1206, 1506, 2010, 2512) (Z Foil) (Z Foil) Ultra High PrUltra High Precision Foil Wecision Foil Wraparraparound Surface Mount Chip Resistoround Surface Mount Chip Resistor with TCR of 0.05 ppm/C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability of 0.005% (50 ppm) FEATURES Temperature coefficient of resistance (TCR): 0.2 ppm/C typical (55C to +125C, +25C ref.) Resistance tolerance: to 0.01% Power coefficient R d ue to self heating: 5 ppm at rated power Power rating: to 750 mW at +70C (see table 3) Load life stability: to 0.005% at 70C, 2000 h at rated power Resistance range: 5 to 125 k (for lower or higher Top View (for date code print specification please refer to table 2) values, please contact us) Bulk Metal Foil resistors are not restricted to standard values, we can supply specific as required values at no extra cost or delivery (e.g. 1K2345 vs. 1K) INTRODUCTION Thermal stabilization time <1 s (nominal value achieved within 10 ppm of steady state value) VSMP Series is the industrys first device to provide high rated power and excellent load life stability along with Electrostatic discharge (ESD) at least to 25 kV extremely low TCR all in one resistor. Short time overload: 0.005% One of the most important parameters influencing stability Non inductive, non capacitive design is the Temperature Coefficient of Resistance (TCR). Rise time: 1 ns effectively no ringing Although the TCR of Bulk Metal Foil is considered Current noise: 0.010 V /V of applied voltage RMS extremely low, this characteristic has been further (<40 dB) refined over the years. The VSMP Series utilizes ultra Voltage coefficient <0.1 ppm/V high precision Z Foil. The Z Foil technology provides a (resistance values above 10 k) significant reduction of the resistive elements sensitivity to ambient temperature variations (TCR) and to self Non inductive: <0.08 H heating when power is applied (Power Coefficient of Non hot spot design Resistance, or PCR). Along with the inherently low PCR Terminal finishes available: lead (Pb)-free, tin/lead alloy and TCR, Z Foil technology also provides remarkably Matched sets are available on request improved load life stability, low noise and tight tolerances. Screening in accordance with EEE-INST-002 and Vishay Foil Resistors (VFR) application engineering MIL-PRF-55342 available (see datasheet resistor department is available to advise and make models 303133 to 303138) recommendations. For non-standard technical Quick prototype quantities available, please contact requirements and special applications, please contact foil vpgsensors.com us using the e-mail address in the footer below. Table 1Tolerance and TCR vs. Resistance Figure 1Power Derating Curve (1) Value (55C to +125C, +25C Ref.) - 55 C + 70 C Typical TCR and 100 Resistance value Tolerance max. Spread 75 250 to 125 k 0.01% 0.2 1.8 ppm/C 100 to <250 0.02% 0.2 1.8 ppm/C 50 50 to <100 0.05% 0.2 2.8 ppm/C 25 to <50 0.1% 0.2 3.8 ppm/C 25 10 to <25 0.25% 0.2 3.8 ppm/C 5 to <10 0.5% 0.2 7.8 ppm/C 0 - 75 - 50 - 25 0+ 25 + 50 + 75 + 100 + 125 + 150 + 175 (1) For tighter performances and non-standard values lower than Ambient Temperature (C) 5 and above 125 k, please contact application engineering using the e-mail addresses in the footer below * This datasheet pr ovides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS compliant. Please see the information/tables in this datasheet for details. Document No.: 63060Document No.: 63060 For any questions, contact www.vishayfoilresistors.com Revision: 25-Jul-2016Revision: 25-Jul-2016 foil vpgsensors.com 1 Percent of Rated Power VSMP Series (0603, 0805, 1206, 1506, 2010, 2512) VSMP Series (0603, 0805, 1206, 1506, 2010, 2512) (Z Foil) (Z Foil) Figure 2Trimming to Values Figure 3Typical Resistance / (Conceptual Illustration) Temperature Curve TCR Values for Different Temperature Ranges Interloop capacitance +500 Current path reduction before trimming in series +400 +300 Mutual +200 Current path after trimming inductance +100 reduction R Trimming process due to change R 0 removes this material in current (ppm) from shorting strip area 100 0.05 ppm/C direction changing current path 200 and increasing 0.1 ppm/C0.1 ppm/C resistance 300 0.14 ppm/C Foil shown in black, etched spaces in white 400 0.16 ppm/C 0.2 ppm/C Note 500 To acquire a precision resistance value, the Bulk Metal Foil 55 25+0+25 60 +75+100+125 chip is trimmed by selectively removing built-in shorting bars. Ambient Temperature (C) To increase the resistance in known increments, marked areas are cut, producing progressively smaller increases in Note resistance. This method reduces the effect of hot spots and The TCR values for <100 are influenced by the termination improves the long-term stability of Bulk Metal Foil resistors. composition and result in deviation from this curve Table 2Dimensions and Land Pattern in Inches (Millimeters) Top View Recommended Land Pattern 2 Date Code L (Year/Week) Footprint X G W T Z D L W Thickness D (1) (1) (1) Chip Size Z G X 0.005 (0.13) 0.005 (0.13) Maximum 0.005 (0.13) 0603 0.063 (1.60) 0.032 (0.81) 0.025 (0.64) 0.011 (0.28) 0.102 (2.59) 0.031 (0.78) 0.031 (0.78) 0805 0.080 (2.03) 0.050 (1.27) 0.025 (0.64) 0.015 (0.38) 0.122 (3.10) 0.028 (0.71) 0.050 (1.27) 1206 0.126 (3.20) 0.062 (1.57) 0.025 (0.64) 0.020 (0.51) 0.175 (4.45) 0.059 (1.50) 0.071 (1.80) 1506 0.150 (3.81) 0.062 (1.57) 0.025 (0.64) 0.020 (0.51) 0.199 (5.05) 0.083 (2.11) 0.071 (1.80) 2010 0.198 (5.03) 0.097 (2.46) 0.025 (0.64) 0.025 (0.64) 0.247 (6.27) 0.115 (2.92) 0.103 (2.62) 2512 0.249 (6.32) 0.127 (3.23) 0.025 (0.64) 0.032 (0.81) 0.291 (7.39) 0.150 (3.81) 0.127 (3.23) (1) Land Pattern Dimensions are per IPC-7351A (2) The date code printing applies to all resistor sizes except for 0603 Table 3Specifications Table 4Load Life Stability (+70C for 2000 h) Rated Max. Working Chip Size R Limits Chip Resistance Maximum Power at Voltage (1) (2) 0.005% at 50 mW Size Range Weight +70C (P R) 0603 0.01% at 100 mW 0603 100 mW 20 V 100 to 5 k 3 mg 0.005% at 100 mW 0805 0805 200 mW 40 V 5 to 8 k 6 mg 0.01% at 200 mW 1206 300 mW 87 V 5 to 25 k 11 mg 0.005% at 150 mW 1206, 1506 0.01% at 300 mW 1506 300 mW 95 V 5 to 30 k 12 mg 0.005% at 200 mW 2010 500 mW 187 V 5 to 70 k 27 mg 2010 0.01% at 500 mW 2512 750 mW 220 V 5 to 125 k 40 mg 0.005% at 500 mW 2512 0.01% at 750 mW (1) For size 2018, please contact us using the e-mail addr ess in the footer below. (2) For non-standard values please contact application engineering www.vishayfoilresistors.com For any questions, contact Document No.: 63060 2 foil vpgsensors.com Revision: 25-Jul-2016