6063 and 6073 Series Panel Mount Indicator Mounting Hole 0.375 and 0.500 6063 Series 6073 Series Flat Face Conical Face Flat face Conical Face .680 .680 .420 .420 .050 .420 .120 .420 .230 .300 1.47 1.31 1.54 1.35 10.0 10.0 10.0 10.0 All dimension in inches. The Glo-Lite Indicator Lights are designed for applications requiring a low cost, line voltage power-on indicator. These indicator lights utilize a high brightness C2A neon lamp providing good visibility and a long life. These indicator lights are constructed with an one-piece body and lens and are available in two face configurations, flat or conical, with or without a chrome bezel. Specifications Description Part Number: 6063-001-534R Red, Flat Face, No Bezel. Speed Nut Included. 6063-001-634R Red, Conical Face, No Bezel. Speed Nut Included. Red, Flat Face, Chrome Bezel. Speed Nut not Included. 6073-001-534R 6073-001-634R Red, Conical Face, Chrome Bezel. Speed Nut not Included. 6073-001-634G Green, Conical Face, Chrome Bezel. Speed Nut not Included. 6073-001-634W White, Conical Face, Chrome Bezel. Speed Nut not Included. Mounting Hole: .375 for 6063 Series, .500 for 6073 Series Mounting Centers: .500 for 6063 Series, .688 for 6073 Series Maximum Panel Thickness: 1.25 for 6063 Series, .078 for 6073 Series Housing/Lens Material: Nylon Bezel (6073 Series only): Chrome Plated Brass Wire Leads: 22 AWG, black 105C PVC Insulation, stranded Electrical: 125 Volts AC, Built-in 30K ohm 1/4 Watt resistor Approvals: UL recognized the first call for illuminated components www.vcclite.com 1.800.522.5546 08/16 Rev 1 1Ordering Data A push-on speed nut is included in the 6063 part numbers, which secures the indicator in place One piece, self-locking, heat-treated, spring-steel fastener that r eplaces threaded nut, lock washer or spanner washer. Eliminates time consuming assembly operations. Fast and easy to appl y, the speed nut fastener provides maximum holding power at minimum cost per fastener. It does not shake loose f rom vibration, yet can be easily loosened without worry about rust-frozen screw threads. For smaller components whe re space is premium. Requires less torque than standard hex-nuts. Can be installed prior to painting p rocesses so threads won t fill. TO FIT STUD .364 .003 .625.010 .500.010 Dimensions in inches Installation Specification Material Speed Nut (one piece) Spring steel .012 thick Stud Size 0.364 + .003 (9.245 mm + 0.076 mm) Speed nut to fit stud size .364 +/- .003, .500 +/-.010 wide x .625 +/- .010 thick. Finish phosphate & zinc chromate Compliance & approvalsCompliance & Approvals the first call for illuminated components www.vcclite.com 1.800.522.5546 08/16 Rev 1 2