.290 MOUNT PANEL LIGHTS Data Display Products 90 Series - Mounting Hardware Provided - For Detailed LED Data, See Discrete Section, MODEL 200 TO ORDER, FOLLOW THE EXAMPLE: Model Wires 1 Select one BOLD component from each numbered category in the tables below. 1 2 C 905 W Lens Lens Bezel (optional) 91 (optional) Model LED Voltage Diffusion Color Color 94 12 3 4 5 6 96 94 -LRG 12H -C W 0 961 964 Part Number 94-LRG12H-CW0 STANDARD INTENSITY - DIFFUSED ENCAPSULATION 6 Voltage/Current Voltage 3 3 pk Iv Viewing V/C Design Max 2 2 5 LED Color (nm) (mcd) Angle Table Vf/If Vf/If 5H 4 V/C Table I -BR RED 635 14 60 I 12H 4 5V/22mA 5.5V/28mA -BA AMB 583 16 60 I 15H 4 12V/20mA 14V/25mA -BG GRN 565 10 60 I 24H 15V/24mA 16.5V/28mA 28H 24V/17mA 26V/20mA 48H MEDIUM INTENSITY - TINTED ENCAPSULATION 28V/16.5mA 30V/18mA 60H 3 pk Iv Viewing V/C 48V/15mA 50V/16mA 9 120 5 LED Color (nm) (mcd) Angle Table 60V/9mA 65V/10mA 120VAC/3.5mA 130VAC/4mA -BCR RED 635 120 35 I Lens -BCA AMB 583 100 35 I 4 Voltage/Current Diffusion -BCG GRN 565 80 24 I -C Design Max HIGH INTENSITY - WATERCLEAR ENCAPSULATION Clear Vf/If Vf/If 3 V/C Table II pk Iv Viewing V/C -N 5 5V/15mA 5.5V/23mA LED Color (nm) (mcd) Angle Table Diffused 12V/15mA 14V/20mA -NWR RED 634 2800 30 I 15V/15mA 16.5V/18mA -NWO ORG 605 2000 30 I 24V/15mA 26V/18mA -NWA AMB 592 2800 30 I Lens Color 28V/15mA 30V/17mA -NWG GRN 520 2400 45 II 5 -NWB BLU 465 700 45 II 48V/9.5mA 50V/10mA R Red B Blue 8 -NWW CWHT 2500 50 II 60V/7mA 65V/8mA 8 -NWL WWHT 1800 50 II 120VAC/3.5mA 130VAC/4mA A Amber W Water -NKR RED 634 3600 15 I -NKO ORG 605 8000 15 I Clear -NKA AMB 592 3600 15 I Y Yellow 10 -NKG GRN 520 10000 15 II -S Smoke -NKB BLU 465 3000 15 II G Green 8 -NKW CWHT 9200 20 II 8 -NKL WWHT 9200 15 II Bezel 6 SPECIALTY LEDs - DIFFUSED ENCAPSULATION Color 3 pk Iv Viewing V/C 5 0 LED Color (nm) (mcd) Angle Table Description Black 7 50 -RLP RED 635 2.3 5 Low Power 7 50 -ALP AMB 583 2.1 5 Low Power 9 7 50 -GLP GRN 565 2.3 5 Low Power White 8 60 -LRG RED/GRN 660/565 90/40 I Bi-Color, Red Cathode 1 The C option specifies a pin length = .20 for panel lights mounted in the PS90 or PS90T socket 6 Ta = 25C. Voltage2 indicates external resistor required. Voltages 5H through 60H are VDC. (pg. 48). Mounting hardware is included with the socket. Do not select the W option. C and For AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier not required for standard pins are not solderable. 5H or 120VAC. DC operation not available for 120V. Bi-Color not available in AC voltages. 2 Model 905 has no lens. Omit Lens Diffusion and Color (e.g. 905-BG5H-0). 7 Omit H when selecting a voltage (e.g. 91-RLP12-CWO). 3 Iv = typical luminous intensity If = 20mA(Ta =25C). Iv is measured without lenses. 8 Select -CW or -NW Lens only. For Low Power LEDs, If = 2mA. 9 Select high intensity LEDs only. 4 Use with Model 905 only. 10 Omit Lens Diffusion when selecting smoked lens (e.g. 91-NWG24H-S0). 5 See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 46 www.datadisplay.com 2005 Data Display Products.290 MOUNT PANEL LIGHTS Data Display Products 90 Series 905 (no lens) 91 94 (flush lens) 96 961 964 TC9 & NW9 Mounting Hardware Standard Wire Leads: All dimensions are in inches (mm) 6.0 total length(nominal)/.50 stripped (nominal), red Tolerances: .x(.x) .025 (.63) / .xx(.xx).010 (.25) anode/black cathode, 24 AWG TPB UL1061 insulation. Specifications are subject to change without notice. Contact factory for other lengths, gauges and colors. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 www.datadisplay.com 47 2005 Data Display Products