.230 PANEL MOUNT REFLECTOR Data Display Products T-1, Water-Tight Optional - Reflective Chrome-Plated Body - Mounting Hardware Provided - Maximum Panel Thickness .125 (PMRL125) .070 (PMRL125, Water-Tight) - For Detailed LED Data, See Discrete Section, MODEL 125 TO ORDER, FOLLOW THE EXAMPLE: Model Wires 1 Select one BOLD component from each numbered category in the tables below. PMRL125 W Water (optional) Model Wire LED Voltage Tight 123 4 PMRL125 W -BCG 12H Part Number PMRL125W-BCG12H STANDARD INTENSITY - DIFFUSED ENCAPSULATION 3 Voltage/Current Voltage 3 1 pk Iv Viewing V/C Design Max 2 2 2 LED Color (nm) (mcd) Angle Table Vf/If Vf/If 5H V/C Table I -BR RED 635 14 60 I 12H 5V/22mA 5.5V/28mA -BA AMB 583 14 60 I 15H 12V/20mA 14V/25mA -BG GRN 565 14 60 I 24H 15V/24mA 16.5V/28mA 28H 24V/17mA 26V/20mA 48H MEDIUM INTENSITY - TINTED ENCAPSULATION 28V/16.5mA 30V/18mA 60H 1 pk Iv Viewing V/C 48V/15mA 50V/16mA 4 120 2 LED Color (nm) (mcd) Angle Table 60V/9mA 65V/10mA 120VAC/3.5mA 130VAC/4mA -BCR RED 635 60 45 I Water -BCA AMB 583 30 45 I 4 5 Tight -BCG GRN 565 44 45 I Voltage/Current -WT Design Max HIGH INTENSITY - WATERCLEAR ENCAPSULATION (optional) Vf/If Vf/If 1 pk Iv Viewing V/C V/C Table II 2 LED Color (nm) (mcd) Angle Table 5V/15mA 5.5V/23mA 12V/15mA 14V/20mA -NWR RED 634 2180 35 I 15V/15mA 16.5V/18mA -NWA AMB 592 2180 35 I 24V/15mA 26V/18mA -NWG GRN 520 2000 45 II 28V/15mA 30V/17mA -NWB BLU 465 600 45 II 48V/9.5mA 50V/10mA -NWW WHT 1100 55 II 60V/7mA 65V/8mA 120VAC/3.5mA 130VAC/4mA SPECIALTY LEDs - DIFFUSED ENCAPSULATION 1 pk Iv Viewing V/C 2 LED Color (nm) (mcd) Angle Table Description 6 50 -RLP RED 635 2.1 2 Low Power 6 50 -ALP AMB 583 1.6 2 Low Power 6 50 -GLP GRN 565 2.1 2 Low Power 72 -RG RED/GRN 630/565 5.0/5.0 I Bi-Color, Red Cathode 1 Iv = typical luminous intensity If = 20mA(Ta =25C). For Low Power LEDs, If = 2mA. 4 Select high intensity LEDs only. 2 See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA. 5 Drip-proof (not submersible), supplied with two neoprene gaskets. 3 Ta = 25C. Votalge2 indicates external resistor required. Voltages 5H through 60H are VDC. For 6 Omit H when selecting a voltage (e.g. PMRL125-RLP12). AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier, not required for 5H or 120VAC. DC operation not available for 120VAC. Bi-Color not available in AC voltages. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 54 www.datadisplay.com 2005 Data Display Products.230 PANEL MOUNT REFLECTOR Data Display Products T-1, Water-Tight Optional PMRL125 Standard Wire Leads: All dimensions are in inches (mm) 6.0 total length(nominal)/.50 stripped (nominal), red Tolerances: .x(.x) .025 (.63) / .xx(.xx).010 (.25) anode/black cathode, 24 AWG TPB UL1061 insulation. Specifications are subject to change without notice. Contact factory for other lengths, gauges and colors. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 www.datadisplay.com 55 2005 Data Display Products