WIDE ANGLE LENSED LEDs Data Display Products Fresnel lens for Wide Angle Viewing - Mates with Mounting Socket Model PS200 (Optional) - For Detailed LED Data, See Discrete Section, MODEL 125 TO ORDER, FOLLOW THE EXAMPLE: Model 1 Select one BOLD component from each SHADED column in the tables below. PC3 Lens Model LED Voltage Color 12 3 4 PC3 -BCG 2 -CG Part Number PC3-BCG2-CG MEDIUM INTENSITY - 2 Voltage (Ta=25C) Lens Color TINTED ENCAPSULATION 4 3 1 2 -CR Red pk Iv 2 LED Color (nm) (mcd) External Resistor -CA Amber -BCR RED 635 60 Required -BCA AMB 583 30 -CY Yellow -BCG GRN 565 44 -CG Green -CW Water Clear -S Smoke PC3 1 Iv = typical luminous intensity If = 20mA (Ta=25C). All dimensions are in inches (mm) 2 Colored lenses must match LED colors (e.g. PC3-BCR2-CR). Water Clear (-CW) and Smoke (-S) lenses may be specified with any LED color. Tolerances: .x(.x) .025 (.63) / .xx(.xx).010 (.25) Specifications are subject to change without notice. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 32 www.datadisplay.com 2005 Data Display Products.250 PANEL MOUNT LED SOCKET Data Display Products Built-In Resistor Optional - For Use with Discrete LEDs, Models 200 & PC3 - Mounting Diameter .250 (6.35) - RC200. KN40, LW40, HN40 Mounting Hardware Included TO ORDER, FOLLOW THE EXAMPLE: Model Wires 1 Select one BOLD component from each numbered category in the tables below. PS200 W Bezel (optional) Model Wires Finish Voltage 123 PS200 W -B -12H Bezel 2 Finish Part Number PS200W-B-12H -B Black -S Silver 1 Voltage/Current PS200 With Resistor PC3 LED not Included Voltage 3 Design Max -5H 2 2 Vf/If Vf/If -12H V/C Table I -15H 5V/22mA 5.5V/28mA -24H 12V/20mA 14V/25mA -28H 15V/24mA 16.5V/28mA -48H 24V/17mA 26V/20mA 28V/16.5mA 30V/18mA 48V/15mA 50V/16mA PS200 Without Resistor Discrete LED not Included 1 Ta=25C. Voltages 5H through 48H are VDC. For AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier not required for 5VAC. For a socket without a built-in resistor, omit Voltage (e.g. PS200-B). 2 Design current will vary depending on LED used. Standard Wire Leads: All dimensions are in inches (mm) 6.0 total length(nominal)/.50 stripped (nominal), red Tolerances: .x(.x) .025 (.63) / .xx(.xx).010 (.25) anode/black cathode, 24 AWG TPB UL1061 insulation. Specifications are subject to change without notice. Contact factory for other lengths, gauges and colors. 445 S. Douglas Street, El Segundo, CA 90245-4630 (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 www.datadisplay.com 33 2005 Data Display Products