Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Preset counter/Rate meter VZ484801 Excitation: 24 VDC Preset counter/Rate meter in 48 mm x 48 mm format - 30 mA( 24 VAC power supply) Universal AC/DC power supply - 40 mA(24 VDC power supply) Input frequency up to 100 kHz - 60 mA(110 bis 230 VAC power supply). 2-line LED display Easy programming by front keys or software Supply: Two relay outputs 24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz 2 W Data security: Password-protected access to setpoint, alarm values and parameters. Programming: Programming and operation is menu-guided via the front keys. With the programming kit, the controller can also be programmed by a Windows - software. The memory card has an internal battery. Thus, the programming of the devices is possible without the supply (up to 1000 programming with a battery). Wiring plan: VZ484801 The compact preset counter VZ484801 can be used as preset counter and also as a rate meter. 3 universal digital inputs are available (NPN/PNP/TTL) can be used with the most common pulse sensors. With the internal quadrature functionality or the external wiring of the VZ484801 user inputs a bi-directional counting could be realiyed and displazed. One user input is also analogue in order to allow setpoint modification by an external potentiometer. Protection class: IP65 from the front (with rubber sealing), back plane Due to the two different modes and the scaling features, the counter is IP20. usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the counter offers a rugged, compact Housing: Black and robust plastic case. housing and a brilliant display. Dimensions: W 48 mm x H 48 mm x D 107 mm. Panel cut out 46 mm x Display: 2-line LED-Display 46 mm. Upper line: Counting value, 4-digit, green with 10.2 mm digits Lower line: Setpoint, 4-digit, red with 7,6 mm digits Connection: Via screw terminal. Indicators: Two red indicators for status relays outputs and a yellow Ambient conditions: Operating temperature: 0 C to +40 C relative indicator for serial communication. humidity 35 % to 95 %. rF, non condensing. C1, C2: ON, when output active R: ON, when serial communication is active Weight: 350 gramms. Buttons: 4 front keys for programming and setting up the setpoints. Scope of delivery: Controller, mounting clamp, sealing, manual. Inputs: Three digital inputs can be configured as PNP, NPN or TTL.Programmable thresholds for activation as a high / low active active / rising edge or level triggered. Input NPN PNP TTL signal Logic level >5,7 V (I1, I2) High < 4,7 V >2,5 V >12,4 v (I3) < 4,7 V (I1, I2) Low > 5,7 V < 2,0 V < 10,2 V (I3) Input I3 can also be used for connection of a potentiometer (0 to 5/10 kOhm) for setting the nominal value (resolution: 1,000 steps). Function of inputs: Counting direction, stop, hold, wait, setpoint input Order codes (I3). Type Order-No. Input frequency: Min 1 Hz to max. 100 kHz Preset counter, 24 to 230 VAC/VDC VZ484801 Frequency display: It is possible to programm the counter as a frequency meter. Accessories Programming module with USB cable SFUR0KIT Relay output: 2 closing contacts (N.O.) with 8 A 250 VAC. Software download under: Programmable as N.O. or N.C.. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wachendorff manufacturer: Other Similar products are found below : Wachendorff