2060-952/028-000 Wago

2 Board-to-Board Links for SMD PCB Terminal Blocks with Push-Buttons, 0.75 mm , 2 Pin Spacing: 4 mm, 8 mm 216 2060 Series Board-to-board link simplifies in-line assembly of LED modules Easy push-in ter mination and disconnection without push-button actuation Technical data: 4 mm 8 mm Pin Spacing 0.157 in. 0.314 in. Ratings per IEC/EN 60664-1 IEC/EN 60664-1 Overvoltage category III III II III III II Pollution degree 3 2 2 3 2 2 Rated voltage 63 V 160 V 320 V 400 V 630 V 1000 V Rated surge voltage 2.5 kV 2.5 kV 2.5 kV 6 kV 6 kV 6 kV Nominal current 9 A 9 A 9 A 9 A 9 A 9 A Approvals per UL/CSA UL/CSA Rated voltage 250 V 600 V Nominal current UL 9 A 9 A Material data: Material group I Insulating material Polyamide 6.6 (PA 6.6) Flammability class per UL 94 V0 Lower/Upper limit temperature -60 C / +105 C Contact material Copper alloy Contact plating Silver-plated Additional approvals and corresponding ratings can be found at www.wago.com. For additional technical information, see Section 13.<8,25 < 11,5 8,25 11,5 < < Board-to-Board Links for SMD PCB Terminal Blocks 2 2 with Push-Buttons, 0.75 mm 217 Pin spacing: 4 mm / 0.157 in. Pin spacing: 8 mm / 0.314 in. 160 V/2.5 kV/2 9 A 250 V/9 A 630 V/6 kV/2 9 A 600 V/9 A 2 4 8 2,6 2,6 1 1 Inserting board-to-board link into PCB terminal block. Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Board-to-board link for SMD PCB terminal blocks Board-to-board link for SMD PCB terminal blocks with with push-buttons, white push-buttons, white 1 2060-951/028-000 1500 2 2060-952/028-000 500 2 2060-962/028-000 375 3 2060-953/028-000 375 4 250 2060-954/028-000 Assembly: Place PCBs on a flat surface and insert links into PCB terminal blocks on adjoining PCBs. Disassembly: Pull PCBs apart. (max. 10 connections/disconnections) min. 4,4 max. 6,4 > < < max. 21 > < max. 21 > min. 4,4 max. 6,4 > < The PCBs must be secured (see figure left). 28 < > < < < 28 > > 4,5< < < > > < < > > < < < > > <