< 16,2 > < 14 > < > < 1,4 Standard Female Connectors picoMAX 5.0 29 With gripping plate and sliding connector release Types of assembly Pin spacing: 5 mm / 0.197 in with male headers/connectors 2 0.2 2.5 mm AWG 24 12 320 V/4 kV/2 16 A 300 V/15 A Header with straight solder pins < L > <12,3> 11,5 < > 5.0 5 2,5 1,1 > < > < > E Header with angled solder pins Male header mated to a female connector with gripping L = pole no. x pin spacing plate and sliding connector release. Pole No. Item No. Pack. Unit Female connector with gripping plate and sliding connector release, light gray 2 2092-1102/002-000 100 3 2092-1103/002-000 100 4 2092-1104/002-000 100 Standard connector 5 2092-1105/002-000 50 6 2092-1106/002-000 50 8 2092-1108/002-000 50 10 2092-1110/002-000 50 12 2092-1112/002-000 50 Push down sliding connector release (gripping plate) to open the locking latch. Gripping plate dimensions (in mm): Pole No. A B C D E Panel feedthrough connector 2 7 1.5 20 Outside 3 12 1.5 20 4 12 1.5 20 5 22 1.5 3. 5 25 9 Inside 6 22 1.5 3.5 25 9 8 22 6.5 3.5 25 9 10 42 1.5 5.0 35 19 12 42 6.5 5.0 35 19 Pull out female connector wit h gripping plate from male header. C > < D < Standard Female Connectors picoMAX 5.0 28 Universal connection for all conductor types Simple, push-in termination of solid and ferruled conductors Ability to wire while mated or unmated Testing port parallel to conductor entry tip contact Integrated locking latches prevent accidental disconnection Technical data: 5 mm Derating Curve Pin Spacing 0.197 in 2092-1122 female connector Ratings per IEC/EN 60664-1 with 2092-1402 male header 2 Pin spacing: 5 mm / Conductor size: 2.5 mm f-st Overvoltage category III III II Based on: EN 60512-5-2 / Reduction factor: 0.8 Pollution degree 3 2 2 Current in A Rated voltage 250 V 320 V 630 V Rated surge voltage 4 kV 4 kV 4 kV 25 Nominal current 16 A 16 A 16 A Approvals per UL/CSA* 20 Use group UL 1059 B C D Rated voltage 300 V 300 V 15 Nominal current UL 15 A 10 A Nominal current CSA 10 Conductor data: 5 Connection technology CAGE CLAMP S 2 Conductor size: solid 0.2 2.5 mm 0 2 10 20 30 40 50 60 70 80 90 100105 Conductor size: ne-stranded 0.2 2.5 mm Ambient operating temperature in C 2 Conductor size: ne-stranded 0.25 1.5 mm (with insulated ferrule) 2-, 6-, 12-pole Conductor rated current 2 Conductor size: ne-stranded 0.25 2.5 mm (with uninsulated ferrule) AWG 24 12 12: THHN, THWN For additional derating curves, see page 72. Strip length 9 10 mm / 0.35 0.39 in Material data: Accessories for picoMAX : Page: Material group I Insulation material Glass-ber-reinforced polyphthalamide (PPA-GF) Operating tools 64 Flammability rating per UL 94 V0 Direct printing 68 Lower/Upper limit temperature 60 C / +100 C Gripping plates 65 Clamping spring material Chrome nickel spring steel (CrNi) Coding pins 66 Contact material Electrolytic copper (E ) Test pin 64 Cu Contact plating tin-plated The picoMAX pluggable connection system includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Approvals are available online at: www.wago.com *CSA approval pending For more technical information, see Full Line Catalog, Volume 2, Section 11