6 7 2 2 2 2 0.2 6 mm 0.08 AWG 24 4 mm 10 0.2 10 mm AWG 24 8 0.2 16 mm AWG 24 6 800 V/8 kV/3 A600 WG V28 , 30 1A 2U 800 V/8 kV/3 600 V, 50 A U 800 V/8 kV/3 600 V, 65 A U 41 A 800 600 V/8 V, 40 kV/3A 2 57 A 600 V, 65 A 2 76 A 600 V, 90 A 2 600 V, 20 A U Terminal block width8 mm / 0.315 in Terminal block width10 mm / 0.394 in Terminal block width12 mm / 0.472 in 32 A 600 V, 25 A 2 L 12 13 mm / 0.49 in L 12 13 mm / 0.49 in L 16 17 mm / 0.65 in Terminal block width 6 mm / 0.236 in U2KfND8aJ9q: . U2KfDaHJq: . 2KfND8aJ9q: . * * * < 46.5 mm /1.83 in > < 52 mm /2.05 in > < 58 mm /2.28 in > Item Pack. unit Item Pack. unit Item Pack. unit No. pcs No. pcs No. pcs 2-conductor through terminal blocks 2-conductor through terminal blocks 2-conductor through terminal blocks grey 282-101 50 grey 284-101 50 grey 283-101 50 blue 282-104 50 blue 284-104 50 blue 283-104 50 6 2-conductor ground (earth) terminal block 2-conductor ground (earth) terminal block 2-conductor ground (earth) terminal block green-yellow 282-107 50 green-yellow 284-107 50 green-yellow 283-107 50 End and intermediate plate, 4 mm/0.157 in thick End and intermediate plate, 2.5 mm/0.098 in thick End and intermediate plate, 4 mm/0.157 in thick orange 282-302 100 (4 x 25) orange 284-302 100 (4 x 25) orange 283-302 50 (2 x 25) grey 282-301 100 (4 x 25) grey 284-301 100 (4 x 25) grey 283-301 50 (2 x 25) Separator, oversized, 2 mm /0.079 in thick Separator, oversized, 2 mm /0.079 in thick Separator, oversized, 2 mm /0.079 in thick orange 282-322 100 (4 x 25) orange 284-322 100 (4 x 25) orange 283-322 50 (2 x 25) grey 282-332 100 (4 x 25) grey 284-332 100 (4 x 25) grey 283-332 50 (2 x 25) Appropriate marking system WMB/WSB (see section 14) Adjacent jumper, insulated, I 41 A Adjacent jumper, insulated,I 57 A Adjacent jumper, insulated,I 70 A N N N grey 282-402 100 (4 x 25) grey 284-402 100 (4 x 25) grey 283-402 50 (2 x 25) yell.-green 282-422 100 (4 x 25) yell.-green 284-422 100 (4 x 25) yell.-green 283-422 50 (2 x 25) Protective warning marker, for 5 terminal blocks, Protective warning marker, for 5 terminal blocks, Protective warning marker, for 5 terminal blocks, fits into screwdriver slot fits into screwdriver slot fits into screwdriver slot yellow 282-405 100 (4 x 25) yellow 284-405 50 (2 x 25) yellow 283-405 50 (2 x 25) Accessories series 282 see page 2.18 Accessories series 284 see page 2.19 Accessories series 283 see page 2.20 Step down jumper see page 6.5 Step down jumper see page 6.5 Step down jumper see page 6.5 Commoning of ground (earth) conductor terminal blocks with through terminal blocks is possible in one direction only using adjacent jumpers. In addition to the required marking of these termi- nal blocks we recommend the use of the yellow- green adjacent jumpers to indicate ground (earth) connection. 800 V = rated voltage 8 kV = rated surge voltage 3 = pollution degree (see also section 15) Suitable for EEx i applications Removal from the carrier rail Push jumper down FIRMLY until FULLY inserted According to EN 60947-7-2 VDE 0611, part 3 steel mounting rails may not be used for ground/earth (PEN) applications. < 37 mm /1.46 in > < 41.5 mm /1.63 in > < 45.5 mm /1.79 in >