286-364 Wago

Pluggable Module - Switching Relay 1/2 Front-entry , 1 make contact Data sheet A1 + 13 14 A2 - Similar photo Item-No. Pack.-unit Description pcs Switching relay for medium switching power 286-364/004-000 1 Relay module with miniature switching relay Technical Data 1 make contact. Contact material AgSnO 2 Input nominal voltage U DC 24 V Extended input voltage and temperature range for N Input voltage range U 30 %...+25 % N railway applications. Current input at U N Installation on terminal block for pluggable module. (coil 20 C) 10 mA Max. switching voltage AC 250 V Max. continuous current 5 A modules not in a row 3 A modules in a row (see diagram) Max. breaking power (resistive) AC 1250 VA The relay modules meet the requirements for an extended (resistive) DC see load limiting value graph input voltage and temperature range in accordance with Recommended min. load 100 mA / AC/DC 12 V DIN EN 50155 / VDE 0115 part 200, Railway applications. Pull-in/operating power 140 mW / 280 mW Electronical traction equipment. Pull-in/dropout/bounce time 5 ms / 4 ms / 5 ms typ They can be used on vehicles operated with alternating Operating at normal rating 100 % continuous duty current having a supply from the catenary via a transformer Dielectric strength contact/ coil 2.5 kV with battery charger and battery. The constant deviation from open contact 1 kV the operating voltage can, in this case, vary between 30 % Nominal voltage acc. to and +25 %. VDE 0110 / Part1/ 4.97 The temperature range extended to 70 C corresponds to the IEC 60664-1 250 V / 4 kV / 3 6 maximum air temperature range in inner rooms of vehicles Mechanical life 5 x 10 switching operations 4 and housings located unprotected in the open air. at max.load (resistive) 5 x 10 switching operations Ambient operating temperature -25 C...+70 C Storage temperature -40 C...+70 C Module dimensions (W x H) (10 x 82,5*) mm / (0.394 x 3.25*) in * from upper edge of DIN 35 rail WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info wago.com Hansastr. 27 D-32423 Minden Fax.: 05 71 / 8 87-169 Web: Pluggable Module - Switching Relay 2/2 Front-entry , 1 make contact Data sheet Standards / prescriptions DIN VDE 0115 Part 200 Load limiting value graph DIN VDE 0160 and IEC 60255 DIN VDE 0435 (corresponding parts) 10 DIN EN 50155 Accessories Terminal block 280-608 Dimensions (W x D) (12 x 73) mm / (0.472 x 2.874) in 10 1 10 0,1 1 10 / (A) Power diagram Cont. current I (A) 50 % cont. duty 5 4 75 % cont. duty 3 100 % cont. duty 2 1 1 2 345 Modules in a row not in a row Note: Inductive loads have to be attenuated by an appropriate protective circuit in order to protect relay coils and contacts WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info wago.com Hansastr. 27 D-32423 Minden Fax.: 05 71 / 8 87-169 Web: