Female Connectors, Double-Row 4 Pin Spacing: 3.5 mm 282 MCS MINI HD Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross 2 sections up to 1.5 mm High-density, wire-to-board connectors for use in very confined spaces Centered strain relief plate anchors conductors, while acting as convenient connection and disconnection handle. It also provides easy access to operating slots even when wired. Op tional dual-purpose lever doubles as a lock and disconnection aid, while preventing accidental disconnection in closed position 100% protected against mismating, available with coding fingers Technical data: 3.5 mm Pin Spacing Derating Curve 0.138 in. 713-1103 female connector with 713-1403 male header Ratings per IEC/EN 60664-1 2 Pin spacing: 3.5 mm / Conductor size: 1.5 mm f-st Overvoltage category III III II Based on: EN 60512-5-2 / Reduction factor: 0.8 Pollution degree 3 2 2 Current in A Rated voltage 80 V 160 V 250 V Rated surge voltage 2.5 kV 2.5 kV 2.5 kV 20 Nominal current 10 A 10 A 10 A Approvals per UL/CSA 15 Use group UL 1059 B C D Rated voltage 150 V 10 Nominal current UL 10 A Nominal current CSA 10 A 5 Conductor data: Connection technology CAGE CLAMP 0 10 20 30 40 50 60 70 80 90 100 105 2 Conductor size: solid 0.081.5 mm Ambient operating temperature in C 2 Conductor size: fine-stranded 0.081.5 mm 6-, 16-, 24-, 36-pole Conductor rated current 2 Conductor size: fine-stranded 0.251.0 mm (with insulated ferrule) 2 Conductor size: fine-stranded 0.251.0 mm (with uninsulated ferrule) AWG 2816 Strip length 67 mm / 0.240.28 in. Material data: MCS MINI HD accessories: Pages: Material group II Insulating material Glass fiber-reinforced polyamide 6.6 (PA 6.6-GF) Marking accessories 570 573 Flammability rating per UL 94 0V Operating tools 296 Lower/Upper limit temperature -60 C / +100 C Direct marking 297 Clamping spring material Chrome nickel spring steel (CrNi) Strain relief plates 296 Contact material Copper alloy Contact plating tin-plated MCS connectors are also available upon request with gold-plated or partially gold-plated contact surfaces. Depending on the version requested, item no. suffix . /010-000 is added to the basic item no. MCS MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Additional approvals and corresponding ratings can be found at www.wago.com. For additional technical information, see Section 13.Female Connectors, Double-Row 4 MCS MINI HD 283 With levers With screw flanges Pin spacing: 3.5 mm / 0.138 in. Pin spacing: 3.5 mm / 0.138 in. Pin spacing: 3.5 mm / 0.138 in. 2 2 2 0.081.5 mm 2816 AWG 0.081.5 mm 2816 AWG 0.081.5 mm 2816 AWG 160 V/2.5 kV/2 10 A 150 V/10 A 160 V/2.5 kV/2 10 A 150 V/10 A 160 V/2.5 kV/2 10 A 150 V/10 A 4 L = (pole no./2) 1 x pin spacing + 5.2 mm L = (pole no./2) 1 x pin spacing + 12.2 mm L = (pole no./2) 1 x pin spacing + 13.6 mm Coding finger Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Female connector, double-row, Female connector with levers, double-row, Female connector with screw flanges, double-row, black black black 6 (3x2) 713-1103 100 6 (3x2) 713-1103/037-000 50 6 (3x2) 713-1103/107-000 50 8 (4x2) 713-1104 50 8 (4x2) 713-1104/037-000 50 8 (4x2) 713-1104/107-000 50 10 (5x2) 713-1105 50 10 (5x2) 713-1105/037-000 50 10 (5x2) 713-1105/107-000 25 12 (6x2) 50 12 (6x2) 25 12 (6x2) 25 713-1106 713-1106/037-000 713-1106/107-000 14 (7x2) 50 14 (7x2) 25 14 (7x2) 25 713-1107 713-1107/037-000 713-1107/107-000 16 (8x2) 25 16 (8x2) 25 16 (8x2) 25 713-1108 713-1108/037-000 713-1108/107-000 18 (9x2) 713-1109 25 18 (9x2) 713-1109/037-000 25 18 (9x2) 713-1109/107-000 25 20 (10x2) 713-1110 25 20 (10x2) 713-1110/037-000 20 20 (10x2) 713-1110/107-000 20 22 (11x2) 713-1111 25 22 (11x2) 713-1111/037-000 20 22 (11x2) 713-1111/107-000 20 24 (12x2) 713-1112 25 24 (12x2) 713-1112/037-000 20 24 (12x2) 713-1112/107-000 20 26 (13x2) 713-1113 25 26 (13x2) 713-1113/037-000 20 26 (13x2) 713-1113/107-000 20 28 (14x2) 713-1114 20 28 (14x2) 713-1114/037-000 20 28 (14x2) 713-1114/107-000 20 30 (15x2) 713-1115 20 30 (15x2) 713-1115/037-000 20 30 (15x2) 713-1115/107-000 20 32 (16x2) 713-1116 20 32 (16x2) 713-1116/037-000 20 32 (16x2) 713-1116/107-000 10 34 (17x2) 713-1117 20 34 (17x2) 713-1117/037-000 10 34 (17x2) 713-1117/107-000 10 36 (18x2) 713-1118 20 36 (18x2) 713-1118/037-000 10 36 (18x2) 713-1118/107-000 10