750-352 ETHERNET Fieldbus Coupler 1 10/100 Mbit/s digital and analog signals 114 Marking area 8 LINK Address ETHERNET 1 ACT Status indication LINK ON 2 -Fieldbus ACT -Fieldbus node MS 1 NS Data contacts 0: WBM I/O 255: DHCP Supply 24 V 24V 0 V X3 0V Fieldbus connection X1 RJ-45 Fieldbus connection X2 Conguration and RJ-45 programming interface (with cover open) The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular The DIP switch configures the last byte of the IP address and may be used for WAGO-I/O-SYSTEM. IP address assignment (DHCP, BootP, static). The fieldbus coupler automatically configures, creating a local process image The coupler is designed for fieldbus communication in both Ethernet/IP and which may include analog, digital or specialty modules. Analog and specialty MODBUS networks. It also supports a wide variety of standard ETHERNET pro- module data is sent via words and/or bytes digital data is sent bit by bit. tocols (e.g., HTTP, BootP, DHCP, DNS, SNMP, FTP). An integrated Web server provides configuration and status information to the Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wi- coupler. red in a line topology. This eliminates additional network devices such as swit- ches or hubs. Both interfaces support Auto-Negotiation and Auto-MDI(X). The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module. Pack. Description Item No. System Data Unit ETHERNET Coupler 750-352 1 No. of couplers connected to Master limited by ETHERNET specification Transmission medium Twisted Pair S-UTP 100 , Cat 5 Max. line length: 100 m Baud rate 10/100 Mbit/s Transmission performance Class D acc. to EN 50173 Buscoupler connection 2 x RJ-45 Protocols EtherNet/IP, MODBUS/TCP (UDP), HTTP, BootP, DHCP, DNS, FTP, SNMP Pack. Accessories Item No. Unit Miniature WSB Quick marking system plain 248-501 5 with marking see pages 352 ... 353 Approvals Also seeApprovals Overvie in Section 1 Conformity marking 1 Shipbuilding ABS, DNV, GL, KR r UL 508 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Phone: +49(0)571/887-0 E-Mail: info wago.com Subject to design changes 16.05.2012 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com ON 12345678 750-352 W1 115 24 V 24 V 0 V DC I/O 10 nF modules 1.2 DC 0 V ELECTRONICS 10 nF 750-352 Technical Data General Specifications Number of I/O modules 64 Operating temperature 0 C ... +55 C with bus extension 250 Wire connection CAGE CLAMP Fieldbus Cross sections 0.08 mm ... 1.5 mm / AWG 28 ... 14 Max. input process image 1020 words Stripped lengths 5 ... 6 mm / 0.22 in Max. output process image 1020 words Dimensions (mm) W x H x L 50 x 65 x 97 Configuration via PC Height from upper-edge of DIN 35 rail Power supply 24 V DC (-25 % ... +30 %) Weight 112 g Input current typ. at rated load (24 V) 280 mA Storage temperature -25 C ... +85 C Efficiency of the power supply (typ.) at Relative air humidity (no condensation) 95 % nominal load (24 V) 90 % Vibration resistance acc. to IEC 60068-2-6 Internal current consumption (5 V) 450 mA Shock resistance acc. to IEC 60068-2-27 Total current for I/O modules (5 V) 700 mA Degree of protection IP20 Isolation 500 V system/supply EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005) EMC: 1 - emission of interference acc. to EN 61000-6-3 (2007) EMC: marine applications - immunity to interference acc. to Germanischer Lloyd (2003) EMC: marine applications - emission of interference acc. to Germanischer Lloyd (2003) FIELDBUS INTERFACE ELECTRONICS FIELDBUS INTERFACE