859-302 Wago

Electronic Terminal Block with Miniature Switching Relay 1/2 1 changeover contact Data sheet 91 mm / 3.58 in Item-No. Pack.-unit Description pcs Switching relay terminal block 859-302 1 Switching relay terminal block with miniature switching Technical Data relay 1 changeover contact Contact material AgSnO 2 for medium switching powers. Input nominal voltage U DC 5 V N Input voltage range U -20 %...+40 % N Safe electrical isolation meets DIN VDE 0140, Input nominal current I N DIN EN 61140. (coil 20 C) 31 mA Max. switching voltage AC 250 V Mounting on DIN 35 rail. Max. continuous current (terminal blocks in a row) 5 A Max. switching power (resistive) AC 1250 VA (resistive) DC see load limiting value graph DC-Load limiting value graph Making capacity 10 A bei max. 4 s 10 and 10 % relative cyclic duration factor Recommended min. load 100 mA / AC/DC 12 V Max. number of switching -1 -1 operations with/without load 6 min / 20 s Operating power < 320 mW Pull-in/dropout/bounce time 5 ms / 6 ms / 5 ms typ Operation at normal rating 100 % continuous duty 10 Dielectric strength contact/coil 4 kV Surge voltage strength contact/coil (1.2/50 s) 6 kV Open contact 1 kV 1 Nominal voltage acc. to 10 0,1 1 10 VDE 0110 Part1/ 4.97 / (A) IEC 60664-1 250 V / 4 kV / 3 7 Mechanical life 2 x 10 switching operations 5 at max. load (resistive) 3 x 10 switching operations Ambient operating temperature at U -25 C...+50 C N Note: Inductive loads have to be attenuated by at 1.2 x U -25 C...+40 C N an appropriate protective circuit in order to Storage temperature -40 C...+70 C protect relay coils and contacts WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info wago.com Hansastr. 27 D-32423 Minden Fax.: 05 71 / 8 87-169 Web: Electronic Terminal Block with Miniature Switching Relay 2/2 1 changeover contact Data sheet Terminal block width 6 mm / 0.236 in Wire connection CAGE CLAMP 2 0.08-2.5 mm / AWG 28-14 Stripped length 5-6 mm / 0.22 in Standards / prescriptions VDE 0435 Part 201, DIN EN 61810-1 VDE 0140, DIN EN 61140 Approvals UL C US UL508 / CSA22.2 E175199 CB scheme IEC 60947-1 / IEC 60947-5-1 DEMKO DK-7574 AC15 3 A AC 250 V DC13 0.5 A DC 24 V Accessories End and intermediate plate 859-525 Comb type jumper bar 2-way 859-402 3-way 859-403 4-way 859-404 5-way 859-405 10-way 859-410 Test pin 1 mm 859-500 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info wago.com Hansastr. 27 D-32423 Minden Fax.: 05 71 / 8 87-169 Web: