TECA-AA-50-24 Wakefield

Thermoelectric Assemblies TEC Assembly Series Air to Air Thermoelectric Cooler Assemblies Wakefield- Vettes TEC Assembly series of Air to Air Thermoelectric Cooler Assemblies are usually used to cool (or heat) objects in enclosures. Heat is absorbed and dissipated by heat exchangers equipped with fans. To install, simply cut a hole, plug in the assembly and connect it to a power source. Our coolers are compact and dependable. All models are optimized for T and efficiency. A variety of voltage options from 12 to 48 volts and cooling capacity from 15 watts to 200 watts are available, Typical applications include cooling electronics cabinets, analytical instruments, commercial refrigeration, food transportation boxes and small electronics enclosures. Operation WV P/N Description Heat Transfer Type Power Cooling Current Voltage Temperature Outline (L/W/H) o TEMA-AA-50-12 THERMOELECTRIC ASSY DIRECT-AIR to Air 12V Air to Air 50W 8.0A 12V -20 to 60 C 160mm x 122.4mm x 147mm o TEMA-AA-50-24 THERMOELECTRIC ASSY DIRECT-AIR to Air 24V Air to Air 50W 4.0A 24V -20 to 60 C 160mm x 122.4mm x 147mm Air to Plate Thermoelectric Cooler Assemblies Wakefield Vettes Air to Plate Cooler Assemblies are typically used in three key applications for cooling/heating: Objects directly on the cold plate, or objects on an additional cold plate of your own design Enclosures by attaching a thermal conductive container to the cold plate Liquids by attaching a thermal conductive tank or liquid heat sink to the cold plate The heat is absorbed by the cold plate, pumped through the TE modules and then dissipated to the air by an air heat sink. Our coolers deliver compact and reliable cooling in a range from 42 to 80 watts. All models are optimized for a variety of voltages, T and efficiency. Typical applications include cooling electronics, analytical instruments, lasers and commercial refrigeration WV P/N Description Heat Transfer Type Power Cooling Current Voltage Operation Temperature Outline (L/W/H) o TEMA-AP-40-12 THERMOELECTRIC ASSY DIRECT-AIR to Plate 12V Air to Plate 40W 3.9A 12V -20 to 60 C 120mm x 102mm x 80mm o TEMA-AP-80-24 THERMOELECTRIC ASSY DIRECT-AIR 2 Plate 24V Air to Plate 80W 4.2A 24V -20 to 60 C 203mm x 155mm x 152mmThermoelectric Assembly Performance Specifications Air to Air Thermoelectric Cooler Assembly TEMA-AA-50-12 The TEMA-AA-50-12 Thermoelectric air conditioner is designed for electronic cabinets and environmental chambers. It can maintain ambient temperatures while removing up to 50W. This model is powered by 12VDC. The TEMA-AA-50-12 is essentially maintenance-free, with no filters to change, and it can be mounted in any orientation, offering design flexibility with solid-state reliability. Features: 50W Capacity at DT = 0C & Ambient Temperature = 30C Refrigerant Free environmentally friendly Wide operating temperature range of -20C to +60C Shift between heating and cooling without using a separate heater Reduced noise and vibration from solid-state heat pump Applications: Outdoor Enclosures Outdoor/Indoor Kiosks and Displays Food/Consumer Refrigerator Battery Cabinet General Specifications: P/N TEMA-AA-50-12 Cooling Method/Radiating Method Forced Air/Forced Air o Ambient Temperature -20 to 60 C Cooling Capacity/Input Power 50W / 95W Heating Capacity 135W Fan Current 0.4A (Radiator) / 0.3A (Cooling) TEC Nominal/Startup Current 8.0A / 9.1A Nominal/Maximum Voltage 12/15 VDC Overall Dimension 160mm x 122.4mm x 147mm Weight 1.8kg (4 lbs) Lifetime >70,000 Hours Cooling Performance Tolerance 10% Wakefield-Vette reserves the right to change these specifications without notice 1/2