Approval Sheet WF25T/U, WF20T/U, WF10T/U, WF12T/U, WF08T/U, WF06T/U, WF04T/U, WF02T/U. 1%, 0.5%, 0.25%, 0.1%, 0.05%, 0.01% TC50 ,TC25 High Precision Thin Film Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC WFxxT & U V01 DEC - 2017 Approval Sheet FEATURE 1. SMD metal film resistor 2. High reliability and stability of 0.25% and below per customer request 3. High performance of TCR: 50 & 25 ppm/ C and below per customer request 4. Low current noise 5. RoHS compliant and lead free APPLICATION Medical equipment Measuring instrument Communication device Computer Printer DESCRIPTION The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive layer that is applied to the top surface of the substrate. The composition of the resistive layer is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For environmental soldering issue, the outer layer of these end terminations is a Lead-free solder . Fig 1. Construction of Chip-R WFxxT /U Page 2 of 10 ASC WFxxT & U V01 DEC - 2017