Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Germin KrG | Modular
feed-through terminals | 4 mm
General ordering data
Order No. 0128320000
Part designation SAK 4 KRG
Version Feed-through terminal, 4 mm, Screw connection,
KrG, Medium yellow, TS 32
EAN 4008190024796
Qty. 100 pc(s).
Product notes
Note, technical data With twin ferrules ZH 0.5 to ZH 2.5, rated voltage
is 690 V.
PT OKIECEx/ATEX rating data
EU-type examination certificate KEMA97ATEX1798U
Download, German KEMA97ATEX1798U_d.pdf
Download English KEMA97ATEX1798U_e.pdf
IECEx Certificate of Conformity IECEXKEM06.0014U
ATEX voltage 550 V
ATEX current 28 A
ATEX conductor cross-section 4 mm
IECEx voltage 550 V
IECEx current 28 A
IECEx conductor cross-section 4 mm
Voltage when using cross-connections CrossConnectionGuide.pdf
Operating temperature range Einsatztemperaturbereich siehe EG-
Baumusterprfbescheinigung/IECEx-Certificate of
Conformity
Marking EN 60079-7 Ex e II
Marking ATEX Directive 94/9/EC Ex II 2 G D
Additional technical data
Colour of insulating material Medium yellow
Connection direction on side
End plate required Yes
- 1 -Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Germin KrG | Modular
feed-through terminals | 4 mm
Additional technical data
Explosion-tested versionEx Yes
Installation advice TS 32
Insulating material KrG
Levels cross-connected internally No
No. of identical terminals 1
No. of levels 1
No. of terminal strips per level 2
Open sides right
Operating temperature range - 60 C, + 130 C
Type of connection Screwed
Type of mounting Snap-on
UL 94 flammability rating of insulation material 5VA
Version Feed-through terminal
CSA rating data
Voltage (CSA) 600 V
CSA current 36 A
Min. cross-section (CSA) AWG 26
Max. cross-section (CSA) AWG 10
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm
Flexible with ferrule, max. (DIN 46228 pt 1) 4 mm
Conductors for clamping (rated connection)
Clamping range, min. 0.13 mm
Clamping range, max. 6 mm
Type of connection Screw connection
2nd type of connection screwed
Connection direction on side
No. of connections 2
Stripping length 12 mm
Clamping screw M 3
Blade size 0.6 x 3.5 mm
Tightening torque range 0.5...1.0 Nm
Torque level with DMS electric screwdriver 2
Gauge to IEC 60947-1 A4
Solid, min. 0.5 mm
Solid, max. 6 mm
Stranded, min. 0.5 mm
Stranded, max. 4 mm
Flexible, min. 0.5 mm
Flexible, max. 4 mm
Flexible with ferrule, min. (DIN 46228/1) 0.5 mm
Flexible with ferrule, max. (DIN 46228/1) 4 mm
Flexible, min., ferrule with plastic collar (DIN 0.5 mm
46228 pt 4)
Flexible, max., ferrule with plastic collar (DIN 4 mm
46228 pt 4)
Twin wire-end ferrule, min. 0.5 mm
- 2 -