Product catalogue Terminals Screwing technology SAK-series modular terminals TS 32 / TS 35 EN combination foot Modular feed-through terminals General ordering data Order No. 0212880000 Part designation SAK 6/EN BL Version Feed-through terminal, 6 mm, Screw connection, PA 66, blue, TS 35 + TS 32 EAN 4008190107147 Qty. 100 pc(s). Product notes Note, accessories When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V. PT OKIECEx/ATEX rating data EU-type examination certificate KEMA97ATEX1798U Download, German KEMA97ATEX1798U d.pdf Download English KEMA97ATEX1798U e.pdf IECEx Certificate of Conformity IECEXKEM06.0014U ATEX voltage 690 V ATEX current 36 A ATEX conductor cross-section 6 mm IECEx voltage 690 V IECEx current 36 A IECEx conductor cross-section 6 mm Voltage when using cross-connections CrossConnectionGuide.pdf Operating temperature range Einsatztemperaturbereich siehe EG- Baumusterprfbescheinigung/IECEx-Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC Ex II 2 G D Additional technical data Colour of insulating material blue Connection direction on side End plate required Yes Explosion-tested versionEx No Installation advice TS 35 + TS 32 Insulating material PA 66 Levels cross-connected internally No No. of levels 1 No. of terminal strips per level 2 Operating temperature range - 50 C, + 100 C Type of connection Screwed UL 94 flammability rating of insulation material V2 Version Feed-through terminal CSA rating data Voltage (CSA) 600 V CSA current 47 A Min. cross-section (CSA) AWG 26 Max. cross-section (CSA) AWG 6 - 1 -Product catalogue Terminals Screwing technology SAK-series modular terminals TS 32 / TS 35 EN combination foot Modular feed-through terminals Conductors for clamping (rated connection) Clamping range, min. 0.33 mm Clamping range, max. 10 mm Type of connection Screw connection 2nd type of connection screwed Connection direction on side Stripping length 12 mm Clamping screw M 3.5 Blade size 4.0 x 0.8 mm Tightening torque range 0.8...1.6 Nm Torque level with DMS electric screwdriver 3 Gauge to IEC 60947-1 A5 Solid, min. 0.5 mm Solid, max. 10 mm Stranded, min. 0.5 mm Stranded, max. 6 mm Flexible, min. 0.5 mm Flexible, max. 10 mm Flexible with ferrule, min. (DIN 46228/1) 0.5 mm Flexible with ferrule, max. (DIN 46228/1) 6 mm Flexible, min., ferrule with plastic collar (DIN 0.5 mm 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 6 mm 46228 pt 4) Twin wire-end ferrule, min. 0.5 mm Twin wire end ferrule, max. 4 mm AWG conductor size, min. AWG 22 AWG conductor size, max. 8.37 mm Dimensions Width 8 mm Height of lowest version 47.5 mm Length 40 mm Disconnect terminals Torque level with DMS electric screwdriver 3 Rating data Rated cross-section 6 mm Rated voltage 800 V Rated impulse voltage 8 kV Rated current 41 A Standards IEC 60947-7-1 Current with max. conductor 57 A Pollution severity 3 UL rating data Voltage (UL) 600 V Current (UL) 40 A Min. cross-section (UL) AWG 22 Max. cross-section (UL) AWG 8 - 2 -