Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAK 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm to 240 mm. General ordering data Type SAK 2.5 Order No. 0279660000 GTIN (EAN) 4008190069926 Qty. 100 pc(s). Creation date October 2, 2013 5:18:31 PM CEST Catalogue status / We reserve the right to make technical changes. 1Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAK 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Length 36.5 mm Width 6 mm Height 46.5 mm Height of lowest version 46.5 mm Net weight 6.3 g Temperatures Operating temperature Storage temperature Continuous operating temp., min. -50 C Continuous operating temp., max. 100 C Rated data IECEx/ATEX Certificate No. (ATEX) KEMA97ATEX1798U ATEX certificate IECEXKEM06.0014U ATEX certificate KEMA97ATEX1798U e.pdf Certificate No. (IECEX) IECEXKEM06.0014U IEC Ex certificate IECEXKEM06.0014U e.pdf Max. voltage (ATEX) 550 V Current (ATEX) 21 A Wire cross section max. (ATEX) 2.5 mm Max. voltage (IECEX) 550 V Current (IECEX) 21 A Wire cross section max. (IECEX) 2.5 mm Voltage, cross-connection CrossConnectionGuide.pdf Operating temperature range For operating temperature Marking EN 60079-7 range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Ex e II Marking ATEX Directive 94/9/EC II 2 G D Additional technical data Explosion-tested version No Open sides right Type of mounting Version Screw connection, for screwable cross- connection, One end Snap-on without connector CSA ratings data Certificate No. (CSA) 12400-129 Voltage size C (CSA) 600 V Current size C (CSA) 25 A Wire cross section max. (CSA) 10 AWG Wire cross section min. (CSA) 26 AWG Clampable wires (additional connection) Conductor cross-section, flexible plus Conductor cross-section, flexible plus plastic collar DIN 46228/1, further plastic collar DIN 46228/1, further connection, min. 0.5 mm connection, max. 2.5 mm Creation date October 2, 2013 5:18:31 PM CEST Catalogue status / We reserve the right to make technical changes. 2