Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 AKZ 4 BL D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm to 240 mm. General ordering data Order No. 0294380000 Type AKZ 4 BL GTIN (EAN) 4008190002152 Qty. 100 pc(s). Creation date July 15, 2013 7:00:26 PM CEST Catalogue status 04.06.2013 / We reserve the right to make technical changes. 1Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 AKZ 4 BL D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Length 27 mm Width 6.1 mm Height 29 mm Height of lowest version 30.5 mm Weight 5.84 g Net weight 5.79 g Temperatures Operating temperature Storage temperature Continuous operating temp., min. -50 C Continuous operating temp., max. 100 C Rated data IECEx/ATEX Certificate No. (ATEX) SIRA02ATEX3001U ATEX certificate SIRA02ATEX3001U d.pdf ATEX certificate SIRA02ATEX3001U e.pdf Certificate No. (IECEX) IECEXSIR05.0038U IEC Ex certificate IECEXSIR05.0038U e.pdf Max. voltage (ATEX) 275 V Current (ATEX) 28 A Wire cross section max. (ATEX) 4 mm Voltage, cross-connection Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- CrossConnectionGuide.pdf Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC II 2 G D Additional technical data Explosion-tested version Yes Number of similar terminals 1 Open sides right Type of mounting Snap-on Version Screw connection, for screwable cross- connection, One end without connector CSA ratings data Certificate No. (CSA) 154685-1372355 Voltage size C (CSA) 300 V Current size C (CSA) 10 A Wire cross section max. (CSA) 12 AWG Wire cross section min. (CSA) 24 AWG Clampable wires (additional connection) Conductor cross-section, flexible plus Conductor cross-section, flexible plus plastic collar DIN 46228/1, further plastic collar DIN 46228/1, further connection, min. 0.5 mm connection, max. 4 mm Creation date July 15, 2013 7:00:26 PM CEST Catalogue status 04.06.2013 / We reserve the right to make technical changes. 2