Data sheet Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAK 2.5/35 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm to 240 mm. General ordering data Type SAK 2.5/35 Order No. 0380460000 Version SAK Series, Feed-through terminal, Rated cross- section: 2.5 mm, Screw connection, Beige, Direct mounting GTIN (EAN) 4008190042363 Qty. 100 pc(s). Creation date February 19, 2016 1:34:00 PM CET Catalogue status 22.01.2015 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAK 2.5/35 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 6.1 mm Width (inches) 0.24 inch Height 44.5 mm Height (inches) 1.752 inch Depth 40 mm Depth (inches) 1.575 inch Net weight 6.33 g Temperatures Continuous operating temp., min. -50 C Continuous operating temp., max. 100 C Material data Material PA 66 Colour beige / yellow UL 94 flammability rating V-2 Rating data IECEx/ATEX Certificate No. (ATEX) KEMA97ATEX1798U Certificate No. (IECEX) IECEXKEM06.0014U Max. voltage (ATEX) 550 V Current (ATEX) 21 A Wire cross section max. (ATEX) 2.5 mm Max. voltage (IECEX) 550 V Current (IECEX) 21 A Wire cross section max. (IECEX) 2.5 mm Voltage, cross-connection Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- CrossConnectionGuide.pdf Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC II 2 G D System specifications Version Screw connection, End cover plate required for screwable cross- connection, One end without connector Yes Number of potentials 1 Number of levels 1 No. of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Mounting rail TS 35 N-function No PE function No PEN function No Additional technical data Explosion-tested version Yes Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Snap-on CSA rating data Certificate No. (CSA) 12400-129 Current size C (CSA) 25 A Voltage size C (CSA) 600 V Wire cross section max. (CSA) 10 AWG Wire cross section min. (CSA) 26 AWG Conductors for clamping (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 4 mm Creation date February 19, 2016 1:34:00 PM CET Catalogue status 22.01.2015 / We reserve the right to make technical changes. 2