Product catalogue Terminals Screwing technology SAK-series modular terminals TS 32 / TS 35 EN combination foot Modular fuse terminals General ordering data Order No. 0474560000 Part designation ASK 1/EN Version Fuse terminal, 4 mm, Screw connection, PA 66, beige, TS 35 + TS 32 EAN 4008190020880 Qty. 100 pc(s). Additional technical data Colour of insulating material beige Connection direction on side End plate required Yes Explosion-tested versionEx No Installation advice TS 35 + TS 32 Insulating material PA 66 Levels cross-connected internally No No. of identical terminals 1 No. of levels 1 No. of terminal strips per level 2 Open sides right Operating temperature range - 50 C, + 100 C Product family SAK Series Type of connection Screwed Type of mounting Snap-on UL 94 flammability rating of insulation material V2 Version Fuse terminal CSA rating data Voltage (CSA) 300 V CSA current 10 A Min. cross-section (CSA) AWG 26 Max. cross-section (CSA) AWG 12 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm Flexible with ferrule, max. (DIN 46228 pt 1) 4 mm Conductors for clamping (rated connection) Clamping range, min. 0.13 mm Clamping range, max. 4 mm - 1 -Product catalogue Terminals Screwing technology SAK-series modular terminals TS 32 / TS 35 EN combination foot Modular fuse terminals Conductors for clamping (rated connection) Type of connection Screw connection 2nd type of connection screwed Connection direction on side No. of connections 2 Stripping length 9 mm Clamping screw M 3 Blade size 0.6 x 3.5 mm Tightening torque range 0.6...0.8 Nm Torque level with DMS electric screwdriver 2 Gauge to IEC 60947-1 A3 Solid, min. 0.5 mm Solid, max. 4 mm Stranded, min. 0.5 mm Stranded, max. 4 mm Flexible, min. 0.5 mm Flexible, max. 4 mm Flexible with ferrule, min. (DIN 46228/1) 0.5 mm Flexible with ferrule, max. (DIN 46228/1) 4 mm Flexible, min., ferrule with plastic collar (DIN 0.5 mm 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 2.5 mm 46228 pt 4) Twin wire-end ferrule, min. 0.5 mm Twin wire end ferrule, max. 1.5 mm AWG conductor size, min. AWG 26 AWG conductor size, max. AWG 12 AWG conductor size, min. 0.13 mm AWG conductor size, max. 3.31 mm Dimensions Width 8.1 mm Height of lowest version 43 mm Length 58 mm TS 32 offset 26 mm TS 35 offset 8.5 mm Disconnect terminals Torque level with DMS electric screwdriver 2 Display element Operating voltage for display, max. 500 V Type of voltage for indicator AC/DC Fuse terminals Cartridge fuse G-Si. 5 x 20 Display Without LED Fuse holder (cartridge holder) Pivoting Operating voltage, max. 500 Type of voltage for indicator AC/DC - 2 -