Product catalogue Terminals Screwing technology W-series modular terminals Modular PE conductor terminals W- standard General ordering data Order No. 1010100000 Part designation WPE 4 Version Earth terminal, 4 mm, Screw connection, Wemid, green/yellow, TS 35 EAN 4008190039820 Qty. 100 pc(s). Product notes Note, accessories Rail support for insulated installation of terminal railSH 2 order no. 0494920000 (10 pcs) Product description Their small size compared to the respective rated cross-section makes the modular terminals with the compact design very popular. PT OKIECEx/ATEX rating data EU-type examination certificate KEMA98ATEX1683U Download, German KEMA98ATEX1683U d.pdf Download English KEMA98ATEX1683U e.pdf IECEx Certificate of Conformity IECEXULD05.0008U Download IECEXULD05.0008U e.pdf ATEX conductor cross-section 4 mm IECEx conductor cross-section 4 mm Voltage when using cross-connections CrossConnectionGuide.pdf Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC Ex II 2 G D Additional technical data Colour of insulating material green/yellow Connection direction on side End plate required No Explosion-tested versionEx Yes Installation advice TS 35 - 1 -Product catalogue Terminals Screwing technology W-series modular terminals Modular PE conductor terminals W- standard Additional technical data Insulating material Wemid Levels cross-connected internally No No. of identical terminals 1 No. of levels 1 No. of terminal strips per level 2 Open sides closed Operating temperature range - 50 C, + 120 C Product family W-Series Type of connection Screwed Type of mounting Screwed UL 94 flammability rating of insulation material V-0 Version PE terminal CSA rating data Min. cross-section (CSA) AWG 26 Max. cross-section (CSA) AWG 10 Conductors for clamping (rated connection) Clamping range, min. 0.13 mm Clamping range, max. 6 mm Type of connection Screw connection Connection direction on side No. of connections 2 Stripping length 10 mm Clamping screw M 3 Blade size 0.6 x 3.5 mm Tightening torque range 0.5...1.0 Nm Torque level with DMS electric screwdriver 2 Gauge to IEC 60947-1 A4 Solid, min. 0.5 mm Solid, max. 6 mm Stranded, min. 0.5 mm Stranded, max. 6 mm Flexible, min. 0.5 mm Flexible, max. 6 mm Flexible with ferrule, min. (DIN 46228/1) 0.5 mm Flexible with ferrule, max. (DIN 46228/1) 4 mm Flexible, min., ferrule with plastic collar (DIN 0.5 mm 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 4 mm 46228 pt 4) AWG conductor size, min. AWG 26 AWG conductor size, max. AWG 10 AWG conductor size, min. 0.13 mm AWG conductor size, max. 6 mm Dimensions Width 6.1 mm Height of lowest version 47 mm Length 56 mm TS 35 offset 28 mm - 2 -