Data sheet Weidmller Interface GmbH & Co. KG W-Series Klingenbergstrae 16 WDU 2.5 GE D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Klippon Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon Connect provides a proven response to a range of different requirements. General ordering data Type WDU 2.5 GE Order No. 1020020000 Version Feed-through terminal, Screw connection, 2.5 mm, 800 V, 24 A, Yellow GTIN (EAN) 4008190171131 Qty. 100 pc(s). Creation date July 6, 2017 3:26:38 PM CEST Catalogue status 30.06.2017 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG W-Series Klingenbergstrae 16 WDU 2.5 GE D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Technical data Dimensions and weights Width 5.1 mm Width (inches) 0.201 inch Height 60 mm Height (inches) 2.362 inch Depth 46.5 mm Depth (inches) 1.831 inch Weight 8.62 g Net weight 7.46 g Temperatures Continuous operating temp., min. -60 C Continuous operating temp., max. 130 C Material data Material Wemid Colour Yellow UL 94 flammability rating V-0 Rating data IECEx/ATEX Certificate No. (ATEX) ATEX certificate ACF- DEMKO14ATEX1338U ATEX 4786180920.pdf Certificate No. (IECEX) IECEXULD14.0005U IEC Ex certificate IECEXULD14.0005U e.pdf Max. voltage (ATEX) 690 V Current (ATEX) 24 A Wire cross section max. (ATEX) 2.5 mm Max. voltage (IECEX) 690 V Current (IECEX) 24 A Wire cross section max. (IECEX) 2.5 mm Operating temperature range For operating temperature Marking EN 60079-7 range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Ex e II Ex 2014/34/EU label II 2 G D System specifications Version Screw connection, for End cover plate required plug-in cross-connector, for screwable cross- connection, One end without connector Yes Number of potentials 1 Number of levels 1 No. of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Mounting rail TS 35 N-function No PE function No PEN function No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Cross-section for connected wire, solid, Cross-section for connected wire, solid, two clampable wires, min. 0.5 mm two clampable wires, max. 1.5 mm Wire connection cross section, finely Wire cross-section, finely stranded, two stranded, two clampable wires, min. 0.5 mm clampable wires, max. 1.5 mm Wire connection cross section, finely Wire connection cross section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 0.5 mm 46228/1, 2 clampable wires, max. 1.5 mm Additional technical data Explosion-tested version Yes Number of similar terminals 1 Open sides right Type of mounting Snap-on Creation date July 6, 2017 3:26:38 PM CEST Catalogue status 30.06.2017 / We reserve the right to make technical changes. 2