Data sheet Weidmller Interface GmbH & Co. KG TERMSERIES Klingenbergstrae 16 TRZ 230VUC 1CO D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com TERMSERIES relay module 1 CO, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With tension-clamp connection AgNi contact Optionally with multiple-voltage input: 24...230 V UC With various protective circuits in the input (free-wheel diode, RC element) Illuminated ejection lever General ordering data Type TRZ 230VUC 1CO Order No. 1122930000 Version TERMSERIES, Relays, No. of contacts: 1, CO contact, AgNi, Rated control voltage: 230 V UC 10%, Continuous current: 6 A, Tension clamp connection GTIN (EAN) 4032248905072 Qty. 10 pc(s). Creation date May 7, 2014 2:54:44 PM CEST Catalogue status 10.03.2014 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG TERMSERIES Klingenbergstrae 16 TRZ 230VUC 1CO D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 6.4 mm Height 90 mm Depth 88 mm Net weight 28.2 g Temperatures Humidity 595% rel. humidity, T = Operating temperature u 40C, no condensation -40 C...+60 C Storage temperature -40 C...+85 C Input Protective circuit Pull-inrop-out current, typ. 2.2 mA / 1.3 mA AC Rectifier 1.7 mA / 0.7 mA DC Rated control voltage 230 V UC 10% Rated current AC 3.5 mA Rated current DC 2.9 mA Power rating 0.8 VA, 700 mW Pull-inrop-out voltage, typ. 159 V / 89 V AC Status indicator 159 V / 89 V DC Green LED Output Rated switching voltage 250 V AC Max. switching voltage, AC 250 V Max. switching voltage, DC 250 V Continuous current 6 A Inrush current 20 A / 20 ms AC switching capacity (resistive), max. 1500 VA 250 V DC switching capacity (resistive), max. 144 W 24 V Switch-on delay < 22 ms Switch-off delay Min. switching power 100 mA / 5 V, 10 V / 10 < 30 ms mA, 24 V / 1 mA Max. switching frequency at rated load 0.1 Hz Contact data No. of contacts 1 Contact design CO contact 6 Contact material Mechanical service life AgNi 5 x 10 switching cycles General data Wire connection method Humidity 595% rel. humidity, T = u Tension clamp connection 40C, no condensation UL 94 flammability rating V-0 Insulation coordination Creepage and clearance distance input Rated voltage output 5.5 mm 300 V Dielectric strength to mounting rail 4 kV / 1 min. Impulse withstand voltage eff 6 kV (1.2/50 s) Protection degree IP 20 Pollution severity 2 Surge voltage category III Other technical data Version Relay coupler Protective circuit Rectifier Status indicator Green LED Creation date May 7, 2014 2:54:44 PM CEST Catalogue status 10.03.2014 / We reserve the right to make technical changes. 2