Data sheet Weidmller Interface GmbH & Co. KG RS ELCO 20/20RM S Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com ELCO contacts inserts are used in electrical power plants, refineries and a variety of process applications wherever stable and reliable signal transmission is required. The ELCO connector features both a reliable connection system and a high signal capacity. The line of RS ELCO interfaces and pre-assembled PAC ELCO cables is a specially designed solution for these requirements. General ordering data Version Interface, RS ELCO, ELCO plug-in connector, 20, LP2N 5.08mm Order No. 1126610000 Type RS ELCO 20/20RM S GTIN (EAN) 4032248908219 Qty. 1 pc(s). Creation date January 21, 2022 12:03:05 AM CET Catalogue status 14.01.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG RS ELCO 20/20RM S Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 60 mm Depth (inches) 2.362 inch Height 70 mm Height (inches) 2.756 inch Width 60 mm Width (inches) 2.362 inch Net weight 652.335 g Temperatures Storage temperature -40...60 C Operating temperature -25...50 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 Connection Data Connection (field side) LP2N 5.08mm Connection on control side ELCO plug-in connector Connector alignment Right Contact material (control side) Phosphor bronze alloy Number of poles (control side) 20-pole plug Polarity hardware codification 1 Rating data Rated voltage 150 V AC / 200 V DC Rated current per connection 1.5 A Total operating current 30 A Insulation coordination (EN50178) According to DIN EN 50178 Rated insulation voltage < 150 V AC Surge voltage category II Pollution severity level 2 Pulse voltage test (1,2/50s) 2.5 kV Insulation test voltage 0.8 kVAC Connection field Clamping range, max. 6 mm Clamping range, min. 0.13 mm Flexible with sleeve, max. 2.5 mm Flexible with sleeve, min. 0.5 mm Flexible, max. H05(07) V-K 4 mm Flexible, min. H05(07) V-K 0.5 mm Max. wire cross-section, AWG AWG 12 Min. wire cross-section, AWG AWG 26 Sleeve with plastic collar, max. 2.5 mm Solid, max. H05(07) V-U 6 mm Solid, min. H05(07) V-U 0.5 mm Stripping length 6 mm Tightening torque, max. 0.6 Nm Tightening torque, min. 0.5 Nm Type of connection Screw connection Classifications ETIM 6.0 EC002780 ETIM 7.0 EC002780 ETIM 8.0 EC002780 ECLASS 9.0 27-14-11-52 ECLASS 9.1 27-14-11-52 ECLASS 10.0 27-14-11-52 ECLASS 11.0 27-14-11-52 Creation date January 21, 2022 12:03:05 AM CET Catalogue status 14.01.2022 / We reserve the right to make technical changes. 2