Data sheet Weidmller Interface GmbH & Co. KG SL 5.08HC/03/180G 3.2SN OR BX Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Product image Pin headers in glass-fibre-reinforced plastic with straight wire outlet optimised for wave soldering. The flange variant (F) can be screwed onto the respective counter piece or the circuit board. There is no need for an extra screw to connect the circuit board when the solder flange (LF) version is used. This also protects the solder points from mechanical strain. All pin headers can be manually coded or ordered pre-coded. HC = High Current. General ordering data Version PCB plug-in connector, male header, closed side, THT solder connection, 5.08 mm, Number of poles: 3, 180, Solder pin length (l): 3.2 mm, tinned, orange, Box Order No. 1146750000 Type SL 5.08HC/03/180G 3.2SN OR BX GTIN (EAN) 4032248108671 Qty. 100 pc(s). Product data IEC: 400 V / 24 A UL: 300 V / 18.5 A Packaging Box Creation date January 12, 2022 6:26:38 AM CET Catalogue status 17.12.2021 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG SL 5.08HC/03/180G 3.2SN OR BX Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 8.5 mm Depth (inches) 0.335 inch Height 15.2 mm Height (inches) 0.598 inch Height of lowest version 12 mm Width 18.44 mm Width (inches) 0.726 inch Net weight 1.55 g System specifications Product family OMNIMATE Signal - series Type of connection BL/SL 5.08 Board connection Mounting onto the PCB THT solder connection Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch Outgoing elbow 180 Number of poles 3 Number of solder pins per pole 1 Solder pin length (l) 3.2 mm Solder pin length tolerance +0.1 / -0.3 mm Solder pin dimensions d = 1.2 mm, Octagonal Solder pin dimensions = d tolerance 0 / -0,03 mm Solder eyelet hole diameter (D) 1.3 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in mm 10.16 mm L1 in inches 0.4 inch Number of rows 1 Pin series quantity 1 Protection degree IP20 Volume resistance 5 m Can be coded Yes Plugging force/pole, max. 10 N Pulling force/pole, max. 7.5 N Material data Insulating material PA GF Colour orange Colour chart (similar) RAL 2000 Insulating material group II Comparative Tracking Index (CTI) 550 UL 94 flammability rating V-0 Contact material CuMg Contact surface tinned Layer structure of solder connection 1...3 m Ni / 2...4 m Sn Layer structure of plug contact 1...3 m Ni / 2...4 m Sn matt matt Storage temperature, min. -40 C Storage temperature, max. 70 C Operating temperature, min. -50 C Operating temperature, max. 100 C Temperature range, installation, min. -25 C Temperature range, installation, max. 100 C Rated data acc. to IEC tested acc. to standard Rated current, min. number of poles IEC 60664-1, IEC 61984 (Tu=20C) 24 A Rated current, max. number of poles Rated current, min. number of poles (Tu=20C) 19 A (Tu=40C) 21 A Rated current, max. number of poles Rated voltage for surge voltage class / (Tu=40C) 16.5 A pollution degree II/2 400 V Rated voltage for surge voltage class / Rated voltage for surge voltage class / pollution degree III/2 320 V pollution degree III/3 250 V Rated impulse voltage for surge voltage Rated impulse voltage for surge voltage class/ pollution degree II/2 4 kV class/ pollution degree III/2 4 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 4 kV Rated data acc. to CSA Rated voltage (Use group B / CSA) 300 V Rated voltage (Use group D / CSA) 300 V Rated current (Use group B / CSA) 18.5 A Rated current (Use group D / CSA) 18.5 A Creation date January 12, 2022 6:26:38 AM CET Catalogue status 17.12.2021 / We reserve the right to make technical changes. 2