Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Signal - series BL/SL 5.08 Klingenbergstrae 16 SL 5.08HC/11/90 3.2SN OR BX D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Pin headers made from glass-fibre-reinforced plastic with 90 wire outlet optimised for wave soldering. The flange variant (F) can be screwed onto the respective counter piece or the circuit board. There is no need for an extra screw to connect the circuit board when the solder flange (LF) version is used. This also protects the solder points from mechanical strain. All pin headers can be manually coded or ordered pre-coded. HC = High Current. General ordering data Type SL 5.08HC/11/90 3.2SN OR BX Order No. 1146920000 Version PCB plug-in connector, male header, open side, Solder connection, 5.08 mm, No. of poles: 11, 90, Solder pin length (l): 3.2 mm, tinned, Orange, Box GTIN (EAN) 4050118051414 Qty. 50 pc(s). Product data IEC: 400 V / 24 A UL: 300 V / 18.5 A Packaging Box Creation date January 27, 2015 9:48:34 AM CET Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Signal - series BL/SL 5.08 Klingenbergstrae 16 SL 5.08HC/11/90 3.2SN OR BX D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Net weight 4.34 g System parameters Product family OMNIMATE Signal - series Mounting onto the PCB BL/SL 5.08 Solder connection Outgoing elbow 90 Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch No. of poles 11 Solder pin length (l) 3.2 mm Solder pin length tolerance 0 / -0.3 mm Solder pin dimensions d = 1.2 mm, Octagonal Can be coded Yes Number of solder pins per pole 1 Solder eyelet hole diameter (D) 1.3 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in mm 50.8 mm 8 L1 in inches Insulation resistance 2 inch 10 Material data Insulating material PA GF Colour Orange Insulating material group II UL 94 flammability rating V-0 CTI 550 Contact material Cu-Leg Contact surface tinned Operating temperature, min. -50 C Operating temperature, max. 100 C Temperature range, installation, min. -25 C Temperature range, installation, max. 100 C Max. relative humidity during storage 80 % Rating data acc. to IEC 60664-1 / IEC 61984 Rated current, min. no. of poles Rated current, max. no. of poles (TU=20C) 24 A (Tu=20C) 19 A Rated current, number of poles Rated current, number of poles (Tu=40C), min 21 A (Tu=40C), max. 16.5 A Rated voltage for surge voltage class / Rated impulse voltage for surge voltage pollution degree III/3 250 V class/ contamination degree III/3 4 kV Rated voltage for surge voltage class / Rated impulse voltage for surge voltage pollution degree III/2 320 V class/ pollution degree III/2 4 kV Rated voltage for surge voltage class / Rated impulse voltage for surge voltage pollution degree II/2 400 V class/ pollution degree II/2 4 kV CSA rating data Rated voltage (Use group B) 300 V Rated current (use group B) 18.5 A Rated voltage (use group D) 300 V Rated current (use group D) 18.5 A UL 1059 rating data Institute (cURus) Certificate No. (cURus) E60693 Rated voltage (use group B) 300 V Rated current (use group B) 18.5 A Rated voltage (use group D) 300 V Rated current (use group D) 10 A Classifications ETIM 4.0 EC002637 ETIM 5.0 EC002637 ETIM 6.0 EC002637 eClass 6.2 27-26-07-04 eClass 7.1 27-44-04-02 Creation date January 27, 2015 9:48:34 AM CET Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 2