Data sheet Weidmller Interface GmbH & Co. KG WTR 2.5 STB2.3 Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Product image Klippon Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon Connect provides a proven response to a range of different requirements. General ordering data Version Test-disconnect terminal, Screw connection, 2.5 mm, 500 V, 24 A, Pivoting, dark beige Order No. 1855620000 Type WTR 2.5 STB2.3 GTIN (EAN) 4032248458301 Qty. 100 pc(s). Creation date January 15, 2022 1:06:13 AM CET Catalogue status 17.12.2021 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG WTR 2.5 STB2.3 Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 48 mm Depth (inches) 1.89 inch Depth including DIN rail 49 mm Height 60 mm Height (inches) 2.362 inch Width 5.1 mm Width (inches) 0.201 inch Weight 10.7 g Net weight 8.58 g Temperatures Storage temperature -25 C...55 C Continuous operating temp., min. -50 C Continuous operating temp., max. 120 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 Material data Material Wemid Colour dark beige UL 94 flammability rating V-0 Rating data IECEx/ATEX Certificate No. (IECEX) IECEXUL14.0097U Max. voltage (IECEX) 400 V Current (IECEX) 32 A Wire cross section max. (IECEX) 4 mm Marking EN 60079-7 Ex ec II C Gc Ex 2014/34/EU label II 3 G D System specifications Version Screw connection, Spacer, End cover plate required With sockets, for plug-in cross-connector, One end without connector Yes Number of potentials 1 Number of levels 1 Number of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Rail TS 35 N-function No PE function No PEN function No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Wire connection cross section, finely Wire connection cross section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm 46228/1, 2 clampable wires, min. 0.5 mm Wire connection cross section, finely Wire cross-section, finely stranded, two stranded, two clampable wires, min. 0.5 mm clampable wires, max. 1.5 mm Additional technical data Explosion-tested version No Number of similar terminals 1 Open sides right Type of mounting Snap-on Creation date January 15, 2022 1:06:13 AM CET Catalogue status 17.12.2021 / We reserve the right to make technical changes. 2