Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Power - series LU Klingenbergstrae 16 LUF 10.00/05/90V 5.0SN BK BX D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com High-performance PCB terminal with a PUSH IN connection system for conductor cross-sections up to 16 mm. Fast connection without tools thanks to pushers to open the contact point, or direct plug-in method Securely closed contact point, with theConnection Safety Concep the conductor is always clamped securely Integrated test point for PS 2.0 test plug Central tip test point for test probes on the upper side of the terminal Increased derating reserves because WEMID insulating material is used. Conductor outlet direction of 180 General ordering data Type LUF 10.00/05/90V 5.0SN BK BX Order No. 2453720000 Version PCB terminal, 10.00 mm, No. of poles: 5, 90, Solder pin length (l): 5 mm, Black, PUSH IN with actuator, Clamping range, max. : 16 mm, Box GTIN (EAN) 4050118493603 Qty. 30 pc(s). Product data IEC: 1000 V / 76 A / 0.5 - 16 mm UL: 600 V / 58 A / AWG 18 - AWG 6 Packaging Box Creation date April 18, 2018 2:46:50 PM CEST Catalogue status 06.04.2018 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Power - series LU Klingenbergstrae 16 LUF 10.00/05/90V 5.0SN BK BX D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Net weight 50.5 g System parameters Product family OMNIMATE Power - series Wire connection method LU PUSH IN with actuator Mounting onto the PCB THT solder connection Conductor outlet direction 90 Pitch in mm (P) 10 mm Pitch in inches (P) 0.394 inch No. of poles 5 Fitted by customer No Solder pin length (l) 5 mm Solder pin dimensions d = 1.2 mm, Octagonal Solder eyelet hole diameter (D) 1.6 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Number of solder pins per pole 3 Screwdriver blade 0.8 x 4.0 Stripping length 18 mm L1 in mm 40 mm L1 in inches Touch-safe protection acc. to DIN VDE IP20 plugged/ IP10 1.575 inch 0470 unplugged Touch-safe protection acc. to DIN VDE touch-safe with connected 57 106 connectors from 6 mm Material data Insulating material Wemid (PA) Colour Black Colour chart (similar) RAL 9011 Insulating material group I 8 CTI Insulation resistance 600 10 UL 94 flammability rating V-0 Contact base material E-Cu Storage temperature, min. -25 C Storage temperature, max. 55 C Max. relative humidity during storage 80 % Operating temperature, min. -40 C Operating temperature, max. 120 C Conductors suitable for connection Clamping range, min. 0.5 mm Clamping range, max. 16 mm Solid, min. H05(07) V-U 0.5 mm Solid, max. H05(07) V-U 16 mm Stranded, min. H07V-R 6 mm Stranded, max. H07V-R 16 mm Flexible, min. H05(07) V-K 0.5 mm Flexible, max. H05(07) V-K 16 mm w. plastic collar ferrule, DIN 46228 pt 4, w. plastic collar ferrule, DIN 46228 pt 4, min. 0.5 mm max. 16 mm w. wire end ferrule, DIN 46228 pt 1, min w. wire end ferrule, DIN 46228 pt 1, 0.5 mm max. 16 mm Plug gauge acc. to EN 60999 a x b 5.3mm (B6) Rated data acc. to IEC tested acc. to standard Rated current, min. no. of poles IEC 60947-7-4 (Tu=20C) 76 A Rated current, max. no. of poles Rated current, min. no. of poles (Tu=20C) 76 A (Tu=40C) 76 A Rated current, max. no. of poles Rated voltage for surge voltage class / (Tu=40C) 76 A pollution degree II/2 1,000 V Rated voltage for surge voltage class / Rated voltage for surge voltage class / pollution degree III/2 1,000 V pollution degree III/3 1,000 V Rated impulse voltage for surge voltage Rated impulse voltage for surge voltage class/ pollution degree II/2 8 kV class/ pollution degree III/2 8 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 8 kV Creation date April 18, 2018 2:46:50 PM CEST Catalogue status 06.04.2018 / We reserve the right to make technical changes. 2