Data sheet Weidmller Interface GmbH & Co. KG MCZ CCC 0-20MA/0-20MA Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Product image MCZ: The smallest solution The smallest analogue signal converter in terminal block format on the market Space-saving conversion of analogue signals in the control cabinet thanks to the slim, 6 mm wide module width Simple wiring with plug-in cross-connectors General ordering data Version Passive isolator, Input : 0-20 mA, (loop powered), Output : 0-20 mA Order No. 8411190000 Type MCZ CCC 0-20MA/0-20MA GTIN (EAN) 4008190992736 Qty. 10 pc(s). Creation date March 26, 2022 9:18:14 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG MCZ CCC 0-20MA/0-20MA Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 63.2 mm Depth (inches) 2.488 inch Width 6 mm Width (inches) 0.236 inch Length 91 mm Length (inches) 3.583 inch Net weight 44.3 g Temperatures Storage temperature -40 C...85 C Operating temperature -25 C...60 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 Input Input current 0(4)...20 mA current loop Number of inputs 1 Pick-up current < 100 A Voltage drop 2.5....3 V at 20 mA Output Cut-off frequency (-3 dB) 100 Hz Load impedance current 500 Number of outputs 1 Output current 0...20 mA General data Accuracy < 0.1 % of end value Configuration none Galvanic isolation between input/output Input/Output 0(4)...20 mA/0(4)...20 mA Rail Temperature coefficient 50 ppm/K of measured value at 0 load TS 35 resistance Type of connection Voltage supply via the input measuring Tension-clamp connection circuit Insulation coordination EMC standards EN 61000-6 Galvanic isolation between input/output Pollution severity 2 Rated voltage 100 V Surge voltage category I Test voltage 510 V AC Connection data Type of connection Tension-clamp connection Clamping range, rated connection 1.5 mm Clamping range, min. 0.5 mm Clamping range, max. 1.5 mm Wire connection cross section AWG, Wire connection cross section AWG, min. AWG 26 max. AWG 16 Wire cross-section, solid, min. 0.5 mm Wire cross-section, solid, max. 1.5 mm Wire cross-section, solid, min. (AWG) AWG 26 Wire cross-section, solid, max. (AWG) AWG 16 Wire connection cross section, finely Wire connection cross section, finely stranded, min. 0.5 mm stranded, max. 1.5 mm Wire cross-section, finely stranded, min. Wire cross-section, finely stranded, max. (AWG) AWG 26 (AWG) AWG 16 Wire connection cross-section, finely Wire connection cross-section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm 46228/4, max. 1.5 mm Conductor cross-section, flexible, AEH Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.5 mm (DIN 46228-1), max. 1.5 mm Creation date March 26, 2022 9:18:14 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 2