Datasheet
Weidmller Interface GmbH & Co. KG
MICROSERIES
Klingenbergstrae 16
MRZ 24VDC 1CO
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-2083
www.weidmueller.com
Relays of the MICROSERIES are used for isolating and
coupling digital signals.
They are characterised by the following features:
modular width 6.1 mm
Pluggable relay
Pluggable cross-connection for four voltages in input and
output circuits,
innovative retention and ejection aid,
LED operating indicator, reverse polarity protection diode,
free-wheeling diode
General ordering data
Order No. 8533660000
Part designation MRZ 24VDC 1CO
Version MICROSERIES, Relays, No. of contacts: 1, CO
contact, Rated control voltage: 24 V DC 20 %,
Tension clamp connection
GTIN (EAN) 4032248169757
Qty. 10 pc(s).
Creation date November 4, 2010 2:49:54 PM CET
Last update 27.09.2010 / We reserve the right to make technical changes. 1Datasheet
Weidmller Interface GmbH & Co. KG
MICROSERIES
Klingenbergstrae 16
MRZ 24VDC 1CO
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-2083
www.weidmueller.com
Technical data
Dimensions
Length 94 mm Width 6.1 mm
Height 91 mm
Temperature
Ambient temperature (operational) -25 C...+50 C Storage temperature -40 C...+60 C
Input
Rated voltage 300 V Rated control voltage 24 V DC 20 %
Pull-in (sparkover) / drop-out voltage DC coil 15.4 V / 6.5 V Rated current DC 6.6 mA
Pull-in / drop-out current, DC coil 4mA/1.2mA Power rating 160 mW
Status indicator Green LED
Output
Continuous current 6 A Max. switching current 6 A
Max. switching frequency at rated load 0.1 Hz Switch-off delay 7.5 ms
Switch-on delay 9.3 ms Switching voltage AC, max. 250 V
making current 6 A max. switching capacity 1500 VA
min. switching capacity 12 V / 100 mA
Contact data
Contact design CO contact No. of contacts 1
6
Contact material Mechanical service life
AgSnO 20 x 10 switching cycles
Rated data
Conductor connection system Tension clamp connection DIN Rail compatibility TS 35
Humidity 40C / 93% rel. humidity, no
condensation
Insulation coordination (EN 50 178)
Clearance and creepage distances for Dielectric strength to mounting rail
4 kV / 1 min.
control/load side 5.5 mm
eff
Impulse withstand voltage 6 kV (1.2/50 s) Overvoltage category III
Pollution severity 2 Protection class IP 20
Protective separation acc. to VDE 0106 part Rated voltage
101 Yes 300 V
Other technical data
Free-wheel diode Yes Reverse polarity protection Available
Status indicator Green LED Version Relay coupler
Approvals
Approvals institutes CSA; CULUS; CURUS;
GOSTME25; CE
Creation date November 4, 2010 2:49:54 PM CET
Last update 27.09.2010 / We reserve the right to make technical changes. 2