Data sheet Weidmller Interface GmbH & Co. KG WAVEFILTER 6A Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Simple radio noise suppression in the cabinet thanks to WAVEFILTER The WAVEFILTER series eliminates the need for time- consuming bolting processes of mains filters. The filters are snapped onto TS 35 and connected to the device whose noise is to be suppressed. The two-stage, 22.5 mm wide WAVEFILTER, in 1 A, 3 A, 6 A and 10 A versions, offers high attenuation at all voltage levels from 5 V, 12 V, 24 V, 48 V, 60 V, 120 V up to 250 V. General ordering data Version WAVESERIES, Surge protection, Surge protection, Attenuation at 100 MHz: 40 dB Order No. 8614800000 Type WAVEFILTER 6A GTIN (EAN) 4032248277094 Qty. 1 pc(s). Creation date September 18, 2022 3:53:08 AM CEST Catalogue status 09.09.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG WAVEFILTER 6A Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 73.4 mm Depth (inches) 2.89 inch Height 92.4 mm Height (inches) 3.638 inch Width 22.5 mm Width (inches) 0.886 inch Net weight 112.12 g Temperatures Storage temperature -25 C...55 C Operating temperature -20 C...40 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 General data Colour beige Design Wave 22.5 L Height with TS 35 112.4 mm Protection degree IP20 Rail TS 35 Segment Power distribution Version Surge protection Insulation coordination acc. to EN 50178 Pollution severity 2 Surge voltage category III Rated data IEC / EN Attenuation at 0.15 MHz < 0.5 dB Attenuation at 1 MHz 18 dB Attenuation at 10 MHz 45 dB Attenuation at 100 MHz 40 dB Capacitance C : 33 nF / C : 22 nF Fuse x and 6.3 A Inductance L and L1 Leakage current at U 0.8 mH n 190 A Rated current I Rated voltage (AC) 6 A 250 V N Rated voltage (DC) 250 V Test voltage P-N 1700 V DC Test voltage P/N-PE 2000 V AC Voltage type AC/DC Connection data Cross-section 2.5 mm Tightening torque, min. 0.4 Nm Tightening torque, max. 0.6 Nm Clamping range, rated connection 2.5 mm Clamping range, min. 0.5 mm Clamping range, max. 2.5 mm Wire connection cross section, finely Wire connection cross section, finely stranded, min. 0.5 mm stranded, max. 2.5 mm Conductor cross-section, flexible, AEH Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.5 mm (DIN 46228-1), max. 1.5 mm Classifications ETIM 6.0 EC002623 ETIM 7.0 EC002623 ETIM 8.0 EC002623 ECLASS 9.0 27-18-28-14 ECLASS 9.1 27-42-02-08 ECLASS 10.0 27-18-28-14 ECLASS 11.0 27-18-28-14 ECLASS 12.0 27-18-28-14 Creation date September 18, 2022 3:53:08 AM CEST Catalogue status 09.09.2022 / We reserve the right to make technical changes. 2