9014140000 Weidmuller

Contents Crimping Crimping Introduction D.2 Overview contacts tools D.4 Crimping tools for wire end ferrules D.6 Introduction Crimping tools for other contacts D.12 Crimping tools for other contacts D.14 Pressing tools D.24 D Crimping tools for connectors D.26 Crimping inserts D.27 Insertion tool for twisted-pair cables D.29 Crimp removal tools D.30 Tools for polymer optical fibre (POF) D.31 Cable tie tools D.32 D.1 CrimpingIntroduction Crimping After stripping, appropriate contacts or wire end ferrules can Crimping of wire end ferrule: Optimum crimp of different be crimped to the cable end. cross-sections as an example Crimping produces a reliable connection between conductor and contact, and has more or less completely replaced Examples for the visual inspection of a crimp connection with soldering. manual and automatic crimping tools by Weidmller: Crimping describes the production of a uniform, nondetachable The conductor insulation must be pushed into the plastic collar. connection between conductor and connecting element. The ferrule sleeve must be completely filled by the conductor. This should be achieved exclusively by the use of a high-quality Depending on the cross-section, the conductor should protrude precision tool. The result is a safe, reliable connection in both approx. 0 0.5 mm from the ferrule sleeve. D electrical and mechanical terms. 0 0.5 Cut-away view: Weidmller offers a wide product range of mechanical crimping tools. An integral ratchet mechanism with disengaging option guarantees optimum processing quality. Crimp connections Front view: produced with Weidmller tools comply with international standards and specifications. 2 2 2 2 0.5 mm 0.75 mm 1.0 mm 1.5 mm The DIN EN 60352-2 standard recommends that tools and contacts should come from the same manufacturer, since this is the only way to ensure consistently high quality. Otherwise, it is the user who is responsible for the quality. Weidmller tools are designed to fit with Weidmller contacts and thus are in full compliance with the DIN EN standard. 2 2 2.5 mm 4.0 mm For cross-sections 2 650 mm , the crimping shape is approximately the same. Crimping