Datasheet Weidmller Interface GmbH & Co. KG CP SNT 160W 24-28V 6.5A Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com One-phase switched-mode power unit in a compact metal housing for rail mounting Performance classes 55 W, 160 W, 300 W. These power supplies can be universally deployed because of their wide input range from 85 V AC to 265 V AC. They are available with output voltages of 5 V, 12 V, 24 V and 48 V. The 300 W ConnectPower power pack includes active PFC control and comprehensive monitoring functions. To increase the power output, up to five power units can be connected in parallel without decoupling on the output side. General ordering data Order No. 9925340024 Part designation CP SNT 160W 24-28V 6.5A Version Power supply, switch-mode power supply unit GTIN (EAN) 4032248217748 Qty. 1 pc(s). Creation date September 3, 2010 6:15:42 PM CEST Last update 28.06.2010 / We reserve the right to make technical changes. 1Datasheet Weidmller Interface GmbH & Co. KG CP SNT 160W 24-28V 6.5A Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com Technical data Dimensions (1) Weight 880 g Length 175 mm Width 57 mm Height 127 mm temperature Ambient temperature (operational) 0 C...+50 C Storage temperature -40 C...+85 C Input Conductor connection system Screw connection Connection range AWG26-12 (0.1-4.0 mm) Input current 2.9 A 115 V AC 1.45 A Input frequency 230 V AC 50/ 60 Hz Input fuse Input voltage (voltage mode input) min. 85/138 V AC, max. 195/250 V AC, typ. 115...230 6.3 A time-lag fuse (internal) V AC Surge protection Varistor making current limit Thermistor output Conductor connection system Screw connection Connection range AWG26-12 (0.1-4.0 mm) Control at 10...100% load 1 % Control at input voltage 0.5 % Mains failure bridge-over time 40 ms 115 V AC / 50 ms Mains failure bridge-over time for 115 V AC 230 V AC 40 ms Mains failure bridge-over time for 230 V AC 50 ms Max. capacitance at output 6000 F Max. residual ripple 0.2 % Output current eff 6.5 A Output power, max. 156 W Output voltage type DC Output voltage, max. 28 V Output voltage, min. 24 V Overload protection Overload current and surge Parallel connection option protection No Surge protection Varistor General data Ambient temperature (operational) 0 C...+50 C DIN Rail compatibility TS 35 Degree of efficiency at max. load 85 % Depth 175 mm EMC standards EN 55011 EN 55022 EN Low Voltage Directive 55024 EN 61000-6-2, 3 73/ 23/ EWG Mounting position, installation notice horizontally on terminal rail Power factor correction TS 35 No Standards EN 50178 EN 60950 IEC950 Status indication Green LED Switching frequency 65 kHz Ambient temperature (operational) 0 C...+50 C Insulation coordination Humidity at operating temperature 20 - 85% RH without Humidity at storage temperature 20 to 90% RH without condensation condensation Protection class IP 20 electrical isolation, I/O rail 3 kV electrical isolation, input-earth 1.5 kV electrical isolation, input-output 3 kV electrical isolation, output-earth 0.5 kV Connection data Clamping range, nom. 4 mm Clamping range, min. 0.1 mm Clamping range, max. 4 mm Creation date September 3, 2010 6:15:42 PM CEST Last update 28.06.2010 / We reserve the right to make technical changes. 2