Data sheet Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 AKE 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The PE terminals are available with rated cross-sections from 1.5 mm to 150 mm. General ordering data Type AKE 2.5 Order No. 1303360000 GTIN (EAN) 4008190084950 Qty. 100 pc(s). Creation date August 19, 2014 7:37:20 PM CEST Catalogue status 07.07.2014 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 AKE 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 5.1 mm Height 28 mm Height of lowest version 28 mm Depth 26 mm Net weight 7.535 g Temperatures Continuous operating temp., min. -50 C Continuous operating temp., max. 100 C Rated data IECEx/ATEX Certificate No. (ATEX) SIRA02ATEX3001U ATEX certificate SIRA02ATEX3001U d.pdf ATEX certificate SIRA02ATEX3001U e.pdf Certificate No. (IECEX) IECEXSIR05.0038U IEC Ex certificate IECEXSIR05.0038U e.pdf Wire cross section max. (ATEX) 2.5 mm Wire cross section max. (IECEX) 2.5 mm Voltage, cross-connection CrossConnectionGuide.pdf Operating temperature range For operating temperature Marking EN 60079-7 range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Ex e II Marking ATEX Directive 94/9/EC II 2 G D Additional technical data Explosion-tested version Yes Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Version Screw connection, With PE connection, One end Screwed without connector CSA ratings data Certificate No. (CSA) 200039-2124451 Wire cross section max. (CSA) 12 AWG Wire cross section min. (CSA) 26 AWG Clampable wires (rated connection) Type of connection Screw connection Stripping length 7 mm Blade size 3.0 x 0.5 mm Connection direction on side Number of connections 2 Clamping range, rated connection, min. 0.13 mm Clamping range, rated connection, max. 4 mm Clamping screw M 2.5 Tightening torque, min. 0.4 Nm Tightening torque, max. 0.6 Nm Torque level with DMS electric Gauge to IEC 60947-1 screwdriver 1 A3 Wire connection cross section, solid Wire connection cross section, solid core, min. rated connection 0.5 mm core max. rated connection 4 mm Wire connection cross section, stranded, Wire connection cross section, stranded, rated connection, min. 1.5 mm rated connection, max. 2.5 mm Wire connection cross section, finely Wire connection cross-section, finely stranded, max. 2.5 mm stranded, min. 0.5 mm Wire connection cross section, finely Wire connection cross section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm 46228/1, rated connection, max. 2.5 mm Cross-section for connected conductor, Wire connection cross-section, finely finely stranded with wire-end ferrules stranded with wire-end ferrules and and plastic collars DIN 46228/4, rated plastic collars DIN 46228/4, rated connection, min. 0.5 mm connection, max. 2.5 mm Wire connection cross section AWG, Wire connection cross section AWG, min. AWG 26 max. AWG 12 Creation date August 19, 2014 7:37:20 PM CEST Catalogue status 07.07.2014 / We reserve the right to make technical changes. 2