900 Series: The Chiseldriver With impact cap and pound-thru blade. Extra tough. The Wera 900 series, the chisel- driver, is the tool for tough jobs in the workshop and in industry. The tool is so rugged that seized screws can be loosened, and seized hose clamps can be knocked off. It can also be used for putting holes into the wall, if the chisel cannot be found. In addition, the blades are Naturally, the 900 series features hardened extra tough. the proven Kraftform handle. This prevents material from The handle ts perfectly in the splintering, thus avoiding hand, because it is shaped by injuries. the hand. Every muscle will grip, and the whole hand is in con- The hex bolster allows for the use tact with the handle. of an open-jawed or ring spanner, to transfer higher torque. New materials used for the char- acteristic hard and soft zones deliver faster, more powerful and less tiring screw-driving action. This is made possible by the pound-thru hexagonal blade, made from bits material 73 Mo V 5 2 together with the integral impact cap. 28The hex bolster allows for the use of an open-jawed or ring spanner, to transfer higher torque. Rugged: For screw-driving, loosening, knocking off and chiselling Safe: Through integral impact cap, pound-thru hexagonal blade, and extremely high- grade material Powerful: Hex bolster for the use of an open-jawed or ring spanner, to transfer higher torque Ergonomic design: Kraftform handle for faster, more power- ful and less tiring screw- For driving, loosening, knocking off and chiselling driving action Dimensionally accurate: Through Wera black point 29 drive tip