DC POWER SPNO/SPDT CONTACTORS TYPE 124 Single Pole Normally Open, or Single Pole Double Throw Contacts. Dust Resistant and Endcaps are Isolated from Bracket SPECIFICATIONS Dimensions, 24- 05 ,- 4 ,- 7 3.56L x 3. 3 W x 2. 9 H Dimensions, 24-305 ,-3 4 4.69L x 3. 3 W x 2. 9 H Weight, 24- 05,- 4 ,- 7 6.0 oz. Weight, 24-305,-3 4 . 9.0 oz. Temperature Range -40 to + 49F 5 Terminations, Contacts / 6 -24 UNF-2A thread Type 124 Terminations, Coil 0-32 UNF-2A thread Recommended Mounting . Vertical plane with coil terminals up Hardware Torque, Contact Terminal . 60 in. lbs. max. Hardware Torque, Coil Terminal 2-8 in. lbs. Caution: A back-up wrench must be used to hold the bottom nut stationary. Coil Coil Contact Rating (Amps) Inductive Load Model Duty Terminal Bracket Voltage Resistance Contact Voltage Normally Open Normally Closed Number Cycle Type Style D.C. (Ohms) Material D.C. Continuous Inrush Continuous Inrush 124-105111 Continuous 4 Standard 2 3.2 Silver Alloy 2 00 400 124-114111 Continuous 4 Standard 24 53.0 Silver Alloy 24 00 400 124-314111 Continuous 6 Standard 24 53.0 Silver Alloy 24 00 400 50 00 124-117111 Continuous 4 Standard 36 20.0 Silver Alloy 36 00 400 124-317111 Continuous 6 Standard 36 20.0 Silver Alloy 36 00 400 50 00 4 = Isolated Coil, SPNO 6 = Isolated Coil, SPDT Coil resistance in Ohms 25C Inrush Current: Current applied within the first 1/2 second of contact closure TYPE 586 Single Pole Normally Open, or Single Pole Double Throw Contacts. Water Resistant and Case is Isolated from Bracket SPECIFICATIONS Dimensions, 586- 4 ,- 7 . 3.69L x 3.30W x 2.90H Dimensions, 586-3 7 . 4.6 L x 3.30W x 2.90H Weight, 586- 4 ,- 7 . 24.0 oz. Weight, 586-3 7 . 26.0 oz. Temperature Range -40 to + 49F 5 6 Terminations, Contacts / -24 UNF-2A thread Type 586 SPNO Terminations, Coil 0-32 UNF-2A thread Recommended Mounting . Vertical plane with coil terminals up Hardware Torque, Contact Terminal . 60 in. lbs. max. Hardware Torque, Coil Terminal 2- 8 in. lbs. Coil Coil Contact Rating (Amps) Inductive Load Model Duty Terminal Bracket Voltage Resistance Contact Voltage Normally Open Normally Closed Number Cycle Type Style D.C. (Ohms) Material D.C. Continuous Inrush Continuous Inrush 586-105111 Continuous 4 Standard 2 2 .0 Silver Alloy 2 200 600 586-108111 Continuous 4 Standard 5 32.8 Silver Alloy 5 200 600 586-114111 Continuous 4 Standard 24 84.0 Silver Alloy 24 200 600 586-117111 Continuous 4 Standard 36 89.0 Silver Alloy 36 200 600 586-120111 Continuous 4 Standard 48 336.0 Silver Alloy 36 200 600 586-314111 Continuous 6 Standard 24 84.0 Silver Alloy 24 200 600 00 200 586-317111 Continuous 6 Standard 36 20.0 Silver Alloy 36 200 600 00 200 4 = Isolated Coil, SPNO NOTE: CAUTION must be used in coil selection for use in 2 volt 6 = Isolated Coil, SPDT sytems where battery charging may expose coil to continuous, Coil resistance in Ohms 25C higher-than-rated voltage. 5 volt coils are recommended. Inrush Current: Current applied within the first 1/2 second of contact closure White-Rodgers will not be responsible for consequences of misap- Ideal for 2V charging systems plied solenoids. www.white-rodgers.com 20 RELAYS and TRANSFORMERSX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Contactors - Electromechanical category: Click to view products by White-Rodgers manufacturer: Other Similar products are found below : 6-1618400-7 686-117111 686-120111 686-924 686-948 70-901 70-914 MB-3D-6 MC-22A/4-AC120V 8-1616943-9 8-1672124-5 A40-30-10-84 120-905 A701U 120-904 1393132-9 154-905 154-912 154-913 154-915 154-902 154-910 AVR743D B6-40-00-84 B7- 40-00-84 1616017-5 1616021-1 MVDILM HP-11D-24 P25-E5019-1 P30C47A12D1-120 P40C47A12D1-120 P40P47D13P1-24-01 CA7- 12-10-240 CA7-72-00-24Z 90-162 9-1393132-2 2NC4F0222 A275KXXV2-120VAC ACC338UMM20 AF80-30-11-13 SZ-B1 CGC-9A- 120 3GC2H0M22 3NC0T0A22 3NC1Q0A22 3NC2H0A22 3NC2T0122/SE 3TF3400-0BB4 MC-12B-DC24V