90-155-29 White-Rodgers

R E l AYS A N D C O N TA C TO R S D.C. Power Contactors Type Type 586 s PDT Type 586 s Pno coil contact Rating-(Amps.) DImens Ions sTAnco R coil Resistance Inductive l oad Inches P ART Duty Terminal Pole Bracket Volt. ( ohms) contact Volt. normally o pen normally c losed case Weight Agency sec. nUmBeR cycle Type* Form style D. c. 25 c m aterial D. c. continuous Inrush ** continuous Inrush ** l W h (oz.) certif. A 586-901 Continuous 4 SPNO Standard 6 5.3 Silver Alloy 6 200 600 - - 3.69 3.30 2.90 24.0 - 586-902 Continuous 4 SPNO Standard 12 21.0 Silver Alloy 12 200 600 - - 3.69 3.30 2.90 24.0 - 586-903 Continuous 4 SPNO Standard 15 32.8 Silver Alloy 15 200 600 - - 3.69 3.30 2.90 24.0 - B 586-905 Continuous 4 SPNO Standard 24 84.0 Silver Alloy 24 200 600 - - 3.69 3.30 2.90 24.0 - 586-906 Continuous 4 SPNO Standard 36 189.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 - 586-907 Continuous 4 SPNO Standard 48 336.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 - C 586-911 Continuous 6 SPDT Standard 12 13.2 Silver Alloy 12 200 600 100 300 4.61 3.30 2.90 26.0 - 586-914 Continuous 6 SPDT Standard 24 53.0 Silver Alloy 24 200 600 100 200 4.61 3.30 2.90 26.0 - 586-915 Continuous 6 SPDT Standard 36 120.0 Silver Alloy 36 200 600 100 200 4.61 3.30 2.90 26.0 - Water Resistant For outline drawings refer to page 57. * Terminal Type: 4 = Isolated Coil 6 = Isolated Coil ** Inrush Current: Current applied within the first 1/2 second of contact closure Engineering Design Data operation in % of n om. Breakdown Voltages coil Rating coil Voltage Rating All Terminals - 60 h z Rms contact m aterial electrical l ife mechanical l ife nominal open max. magnetic max. contacts oper. oper. oper. D. c. coil Rating safe opposite same To oper. At Per oper. At Per Temp. Type (Watts) Pick-up operate Polarity Polarity Ground Power Pilot Rated l oad m in. no l oad m in F 586 8 - SPNO 75% 110% 500 500 500 Silver Alloy - 50,000 2 100,000 30 150 12 - SPDT Temperature Range Type 586 c ustom Design c apabilities -40F to 150F Coil voltages 6 VDC through 48 VDC High vibration Terminations Please complete application data form on page 95 of this section. Contacts: 5/16 -24 UNF-2A thread Coil: 10-32 UNF-2A thread Recommended m ounting V ertical plane with coil terminals up. hardware Torque s pecification Contact Terminal: 60 inch-lbs., max. Coil Terminal: 12-18 inch lbs. note: caution must be used in coil selection for use in 12 volt systems where battery charging may expose coil to continuous, higher-than-rated voltage. s tancor will not be responsible for consequences of misapplied solenoids. www.stancor.com R E l AYS A N D C O N TA C TO R S Type Terminal Type Isolated Coil SPNO .281 wIde X .600 lonG slot 3.300 W 2.300 5/16-24 unf-2A X .594 lonG 3.688 L 10-32 unf-2A X .375 lonG 2.797 H Terminal Type Isolated Coil SPDT .281 wIde X .600 lonG slot 3.300 W 2.300 5/16-24 unf-2A X .594 lonG 4.618 L 10-32 unf-2A X .375 lonG 2.797 H www.stancor.com