www.wihatools.com
5
Insulated Electricians Diagonal Cutters 32861 Diagonal Cutters W/Stripping Holes. Insulation According
to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E
and CSA, up to 1000 Volt. Individually Tested.
Drop-forged from special tool steel, cutters additionally induction
hardened to approx. 64HRC, chrome-nickel plated, mirror-polished.
Ergonomic comfort grip with slip guard. Holes in the cutting edge for
stripping copper wire of 1.5 and 2.5. Strips AWG sizes #10 & #14.
Item Cutting Capacity
1000volt
Copper AWG
No. mm Inch Pkg. lbs.
SHOP
32861 160 6.3 #6 1 .55
Diagonal Cutters. Insulation According to VDE 0682/part 201,
Insulated Diagonal Cutters 328
EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA, up to 1000
Volt. Individually Tested. DIN ISO 5749 Low wear lap joint, riveted
and able to withstand high levels of load. Lightweight action, clean
cutting. Long term cutting is achieved through additional inductive
hardening to approx. 64HRC. Special tool steel hardened & tempered.
For soft & medium hard wire. 32832 & 32834 for soft, hard & piano wire.
Item
Cutting Capacity
Copper AWG
No. mm Inch Pkg. lbs.
1000volt
32830 140 5.5 #6 1 .47
32832 160 6.3 #6 1 .49
SHOP
32834 180 7.0 #6 1 .62
Insulated High Leverage Diagonal Cutters High Leverage Diagonal Cutters. Insulation According to 328
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and
CSA, up to 1000 Volt. Individually Tested. DIN ISO 5749
Semi-circular. Low wear lap joint, riveted and able to withstand high
levels of load. Lightweight action, clean cutting. Long term cutting is
achieved through additional inductive hardening to approx. 64HRC.
C70 special tool steel hardened and tempered to high quality. For soft,
hard and piano wire, lay-on joint, optimized power transmission.
Item
Cutting Capacity
Copper AWG
No. mm Inch Pkg. lbs.
1000volt
New dynamic joint provides
32835 160 6.3 #6 1 .64
40% easier cuts and
32836 180 7.0 #5 1 .67
significantly longer tool life
SHOP
32838 200 8.0 #4 1 .80
Insulated Serrated Edge Cable Cutters 328 Serrated Edge Cable Cutters. Insulation According to VDE
0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA,
up to 1000 Volt. Individually Tested. Light, clean cutting ground
precision cutting edges. Durable cutting is achieved through additional
inductive hardening to approx. 64HRC. Special tool steel, hardened &
tempered. For cutting of copper & aluminum cables without crushing.
Item
No. mm Inch mm2 Pkg. lbs.
32826 160 6.3 16 50 1 .42
1000volt
SHOP
32828 200 8.0 20 60 1 .67
Stripping Pliers. Insulation According to VDE 0682/part 201,
Insulated Stripping Pliers 32860
EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA, up to 1000
Volt. Individually Tested. Heavy duty forged with induction hardened
cutting edges for even stripping of insulation. Drop-forged from special
tool steel, chrome & nickel plated, mirror-polished. Ergo comfort grip with
slip guard. Spring & adjusting screw, for stripping up to 5mm/#4 Awg.
1000volt
Item Stripping Capacity
64HRC Copper AWG
No. mm Inch Pkg. lbs.
SHOP
cutting edges
32860 160 6.3 #8 - #28 1 .50 X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Wire Stripping & Cutting Tools category:
Click to view products by Wiha manufacturer:
Other Similar products are found below :
6-690504-4 684042-3 690468-2 690787-1 691901-2 692968-6 693855-1 804823-3 809688-1 810412 813066-2 813070-1 819395-1
819396-1 819397-1 844765-5 852765-1 904223-1 1-240644-1 1-240644-7 1-240833-0 1-240642-7 1320906-1 1320908-3 133900-001
1338118-1 1-356885-4 1424635-1 1424645-1 1424649-1 1424653-1 1424650-1 1-458031-5 1-458230-5 1-454204-0 1-458030-5 1-
458230-1 1-462006-1 1490498-1 1583609-2 MT10-250Q 1-690440-9 2-1579002-4 240645-3 240825-9 2-458031-1 2-539783-7 L-5211 2-
690451-4 2-690495-4