D
WIMA FKP 2
Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 5 mm.
Capacitances from 33 pF to 0.033 mF. Rated Voltages from 63 VDC to 1000 VDC.
Special Features Electrical Data
Pulse duty construction Capacitance range: Test voltage: 2 U , 2 sec.
r
Close tolerances up to 2.5 % 33 pF to 0.033 mF (E12-values on request) Maximum pulse rise time:
(1 % on request) Rated voltages: 1000 V/msec for pulses equal to the
Very low dissipation factor 63 VDC, 100 VDC, 250 VDC, 400 VDC, rated voltage
Negative capacitance change 630 VDC, 800 VDC, 1000 VDC Dielectric absorption:
versus temperature Capacitance tolerances: 0.05%
Very low dielectric absorption 20%, 10%, 5%, 2.5% (2%, 1.5% Temperature coefficient:
-6
According to RoHS 2011/65/EU or 1% available as precision capacitors 200 x 10 /+ C (typical)
subject to special enquiry) Voltage derating:
Operating temperature range: A voltage derating factor of 1.35 % per K
Typical Applications
55+ C to +100+ C must be applied from +85+ C for DC
Test specifications: voltages and from +75+ C for AC
For high frequency applications e.g.
In accordance with IEC 60384-13 voltages
Sample and hold
Climatic test category:
Reliability:
Timing
55/100/56 in accordance with IEC Operational life 300 000 hours
LC-Filtering
Insulation resistance at +20+ C: Failure rate 5 fit (0.5 x U and 40+ C)
Oscillating circuits r
5
5 x 10 M
Audio equipment
6
(mean value: 1 x 10 M)
Measuring voltage:
Construction
U = 63 V: U = 50 V/1 min.
r test
U 100 V: U = 100 V/1 min.
r test
Dielectric:
Dissipation factors at +20) C: tan d
Polypropylene (PP) film
at f C 1000 pF 1000 pF < C 4700 pF C > 4700 pF
Capacitor electrodes:
Metal foil -4 -4 -4
1 kHz 3 x 10 4 x 10 4 x 10
Internal construction:
-4 -4 -4
10 kHz 3 x 10 4 x 10 4 x 10
-4 -4
100 kHz 4 x 10 5 x 10
-4
1 MHz 10 x 10
Plastic film
Metal foil electrode
Mechanical Tests Packing
Terminating wire
Pull test on pins: Available taped and reeled.
10 N in direction of pins according to
IEC 60068-2-21 Detailed taping information and graphs
Vibration: at the end of the catalogue.
Encapsulation:
6 hours at 10 ... 2000 Hz and 0.75 mm
Solvent-resistant, flame-retardant plastic
displacement amplitude or 10 g in
case with epoxy resin seal, UL 94 V-0
accordance with IEC 60068-2-6
Terminations:
Low air density:
Tinned wire.
1kPa = 10 mbar in accordance with
Marking:
IEC 60068-2-13
Colour: Red. Marking: Black.
Bump test:
Epoxy resin seal: Yellow
2
4000 bumps at 390 m/sec in For further details and graphs please
accordance with IEC 60068-2-29 refer to Technical Information.
34
04.16-- 33 pF
-- 47 pF
-- 100 pF
-- 220 pF
-- 470 pF
-- 1000 pF
-- 2200 pF
-- 4700 pF
-- 0.01 F
-- 0.022 F
-- 0.033 F
D
WIMA FKP 4WIMA FKP 2
Continuation
General Data
63 VDC/40 VAC* 100 VDC/63 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
100 pF 4.5 6 7.2 5 FKP2C001001D00_ _ _ _ 4.5 6 7.2 5 FKP2D001001D00_ _ _ _
150 4.5 6 7.2 5 FKP2C001501D00_ _ _ _ 4.5 6 7.2 5 FKP2D001501D00_ _ _ _
220 4.5 6 7.2 5 FKP2C002201D00_ _ _ _ 4.5 6 7.2 5 FKP2D002201D00_ _ _ _
330 4.5 6 7.2 5 FKP2C003301D00_ _ _ _ 4.5 6 7.2 5 FKP2D003301D00_ _ _ _
470 4.5 6 7.2 5 FKP2C004701D00_ _ _ _ 4.5 6 7.2 5 FKP2D004701D00_ _ _ _
680 4.5 6 7.2 5 FKP2C006801D00_ _ _ _ 4.5 6 7.2 5 FKP2D006801D00_ _ _ _
1000 pF 4.5 6 7.2 5 FKP2C011001D00_ _ _ _ 4.5 6 7.2 5 FKP2D011001D00_ _ _ _
1500 4.5 6 7.2 5 FKP2C011501D00_ _ _ _ 4.5 6 7.2 5 FKP2D011501D00_ _ _ _
2200 4.5 6 7.2 5 FKP2C012201D00_ _ _ _ 4.5 6 7.2 5 FKP2D012201D00_ _ _ _
3300 4.5 6 7.2 5 FKP2C013301D00_ _ _ _ 5.5 7 7.2 5 FKP2D013301G00_ _ _ _
4700 4.5 6 7.2 5 FKP2C014701D00_ _ _ _ 5.5 7 7.2 5 FKP2D014701G00_ _ _ _
6800 4.5 6 7.2 5 FKP2C016801D00_ _ _ _ 5.5 7 7.2 5 FKP2D016801G00_ _ _ _
0.01 mF 5.5 7 7.2 5 FKP2C021001G00_ _ _ _ 6.5 8 7.2 5 FKP2D021001I00_ _ _ _
0.015 6.5 8 7.2 5 FKP2C021501I00_ _ _ _ 7.2 8.5 7.2 5 FKP2D021501J00_ _ _ _
0.022 7.2 8.5 7.2 5 FKP2C022201J00_ _ _ _ 8.5 10 7.2 5 FKP2D022201L00_ _ _ _
0.033 8.5 10 7.2 5 FKP2C023301L00_ _ _ _
250 VDC/160 VAC* 400 VDC/220 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
100 pF 4.5 6 7.2 5 FKP2F001001D00_ _ _ _ 4.5 6 7.2 5 FKP2G001001D00_ _ _ _
150 4.5 6 7.2 5 FKP2F001501D00_ _ _ _ 4.5 6 7.2 5 FKP2G001501D00_ _ _ _
220 4.5 6 7.2 5 FKP2F002201D00_ _ _ _ 4.5 6 7.2 5 FKP2G002201D00_ _ _ _
330 4.5 6 7.2 5 FKP2F003301D00_ _ _ _ 4.5 6 7.2 5 FKP2G003301D00_ _ _ _
470 4.5 6 7.2 5 FKP2F004701D00_ _ _ _ 4.5 6 7.2 5 FKP2G004701D00_ _ _ _
680 4.5 6 7.2 5 FKP2F006801D00_ _ _ _ 4.5 6 7.2 5 FKP2G006801D00_ _ _ _
1000 pF 4.5 6 7.2 5 FKP2F011001D00_ _ _ _ 4.5 6 7.2 5 FKP2G011001D00_ _ _ _
1500 4.5 6 7.2 5 FKP2F011501D00_ _ _ _ 4.5 6 7.2 5 FKP2G011501D00_ _ _ _
2200 4.5 6 7.2 5 FKP2F012201D00_ _ _ _ 4.5 6 7.2 5 FKP2G012201D00_ _ _ _
3300 5.5 7 7.2 5 FKP2F013301G00_ _ _ _ 5.5 7 7.2 5 FKP2G013301G00_ _ _ _
4700 6.5 8 7.2 5 FKP2F014701I00_ _ _ _ 6.5 8 7.2 5 FKP2G014701I00_ _ _ _
6800 6.5 8 7.2 5 FKP2F016801I00_ _ _ _ 7.2 8.5 7.2 5 FKP2G016801J00_ _ _ _
0.01 mF 7.2 8.5 7.2 5 FKP2F021001J00_ _ _ _ 8.5 10 7.2 5 FKP2G021001L00_ _ _ _
0.015 8.5 10 7.2 5 FKP2F021501L00_ _ _ _
10
* AC voltage: f 1000 Hz; 1.4 x U + UDC U
rms r
Part number completion:
** PCM = Printed circuit module = pin spacing.
Z
Tolerance: 20 % = M
10 % = K
E12 values and individual values available
1
5 % = J 7
from 27 pF up on request.
5
2.5 % = H
3
W
L
2 % = G
Dims. in mm.
1.5 % = F
0.1
H
1 % = E
7
5
Packing: bulk = S
3
6 -2
Pin length: 6-2 = SD
d = 0.5 l
d
Taped version see page 145.
5
0.01
PCM
1135 730 57100 1000
at thepin exit points f/MHz
(0 .5)
Impedance change with frequency
(general guide).
Rights reserved to amend design data without prior notification.
Continuation page 36
35
04.16