FKP2J011001D00HI00 WIMA

D WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 33 pF to 0.033 mF. Rated Voltages from 63 VDC to 1000 VDC. Special Features Electrical Data Pulse duty construction Capacitance range: Test voltage: 2 U , 2 sec. r Close tolerances up to 2.5 % 33 pF to 0.033 mF (E12-values on request) Maximum pulse rise time: (1 % on request) Rated voltages: 1000 V/msec Very low dissipation factor 63 VDC, 100 VDC, 250 VDC, 400 VDC, Dielectric absorption: Negative capacitance change 630 VDC, 800 VDC, 1000 VDC 0.05% versus temperature Capacitance tolerances: Temperature coefficient: -6 Very low dielectric absorption 20%, 10%, 5%, 2.5% (2%, 1.5% 200 x 10 /+ C (typical) According to RoHS 2011/65/EU or 1% available as precision capacitors Voltage derating: subject to special enquiry) A voltage derating factor of 1.35 % per K Operating temperature range: must be applied from +85+ C for DC Typical Applications 55+ C to +100+ C voltages and from +75+ C for AC Test specifications: voltages For high frequency applications e.g. In accordance with IEC 60384-13 Reliability: Sample and hold Climatic test category: Operational life 300 000 hours Timing 55/100/56 in accordance with IEC Failure rate 5 fit (0.5 x U and 40+ C) r LC-Filtering Insulation resistance at +20+ C: Oscillating circuits 5 3 x 10 M Audio equipment Measuring voltage: U = 63 V: U = 50 V/1 min. r test Construction U 100 V: U = 100 V/1 min. r test Dissipation factors at +20) C: tan d Dielectric: at f C 1000 pF 1000 pF < C 4700 pF C > 4700 pF Polypropylene (PP) film Capacitor electrodes: -4 -4 -4 1 kHz 5 x 10 5 x 10 5 x 10 Metal foil -4 -4 -4 10 kHz 6 x 10 6 x 10 6 x 10 Internal construction: -4 -4 100 kHz 8 x 10 8 x 10 -4 1 MHz 10 x 10 Plastic film Metal foil electrode Mechanical Tests Packing Terminating wire Pull test on pins: Available taped and reeled. 10 N in direction of pins according to IEC 60068-2-21 Detailed taping information and graphs Vibration: at the end of the catalogue. Encapsulation: 6 hours at 10 ... 2000 Hz and 0.75 mm Solvent-resistant, flame-retardant plastic displacement amplitude or 10 g in case with epoxy resin seal, UL 94 V-0 accordance with IEC 60068-2-6 Terminations: Low air density: Tinned wire. 1kPa = 10 mbar in accordance with Marking: IEC 60068-2-13 Colour: Red. Marking: Black. Bump test: 2 4000 bumps at 390 m/sec in For further details and graphs please accordance with IEC 60068-2-29 refer to Technical Information. 34 06.21-- 33 pF -- 47 pF -- 100 pF -- 220 pF -- 470 pF -- 1000 pF -- 2200 pF -- 4700 pF -- 0.01 F -- 0.022 F -- 0.033 F D WIMA FKP 4WIMA FKP 2 Continuation General Data 63 VDC/40 VAC* 100 VDC/63 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 100 pF 4.5 6 7.2 5 FKP2C001001D00 4.5 6 7.2 5 FKP2D001001D00 150 4.5 6 7.2 5 FKP2C001501D00 4.5 6 7.2 5 FKP2D001501D00 220 4.5 6 7.2 5 FKP2C002201D00 4.5 6 7.2 5 FKP2D002201D00 330 4.5 6 7.2 5 FKP2C003301D00 4.5 6 7.2 5 FKP2D003301D00 470 4.5 6 7.2 5 FKP2C004701D00 4.5 6 7.2 5 FKP2D004701D00 680 4.5 6 7.2 5 FKP2C006801D00 4.5 6 7.2 5 FKP2D006801D00 1000 pF 4.5 6 7.2 5 FKP2C011001D00 4.5 6 7.2 5 FKP2D011001D00 1500 4.5 6 7.2 5 FKP2C011501D00 4.5 6 7.2 5 FKP2D011501D00 2200 4.5 6 7.2 5 FKP2C012201D00 4.5 6 7.2 5 FKP2D012201D00 3300 4.5 6 7.2 5 FKP2C013301D00 5.5 7 7.2 5 FKP2D013301G00 4700 4.5 6 7.2 5 FKP2C014701D00 5.5 7 7.2 5 FKP2D014701G00 6800 4.5 6 7.2 5 FKP2C016801D00 5.5 7 7.2 5 FKP2D016801G00 0.01 mF 5.5 7 7.2 5 FKP2C021001G00 6.5 8 7.2 5 FKP2D021001I00 0.015 6.5 8 7.2 5 FKP2C021501I00 7.2 8.5 7.2 5 FKP2D021501J00 0.022 7.2 8.5 7.2 5 FKP2C022201J00 8.5 10 7.2 5 FKP2D022201L00 0.033 8.5 10 7.2 5 FKP2C023301L00 250 VDC/160 VAC* 400 VDC/220 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 100 pF 4.5 6 7.2 5 FKP2F001001D00 4.5 6 7.2 5 FKP2G001001D00 150 4.5 6 7.2 5 FKP2F001501D00 4.5 6 7.2 5 FKP2G001501D00 220 4.5 6 7.2 5 FKP2F002201D00 4.5 6 7.2 5 FKP2G002201D00 330 4.5 6 7.2 5 FKP2F003301D00 4.5 6 7.2 5 FKP2G003301D00 470 4.5 6 7.2 5 FKP2F004701D00 4.5 6 7.2 5 FKP2G004701D00 680 4.5 6 7.2 5 FKP2F006801D00 4.5 6 7.2 5 FKP2G006801D00 1000 pF 4.5 6 7.2 5 FKP2F011001D00 4.5 6 7.2 5 FKP2G011001D00 1500 4.5 6 7.2 5 FKP2F011501D00 4.5 6 7.2 5 FKP2G011501D00 2200 4.5 6 7.2 5 FKP2F012201D00 4.5 6 7.2 5 FKP2G012201D00 3300 5.5 7 7.2 5 FKP2F013301G00 5.5 7 7.2 5 FKP2G013301G00 4700 6.5 8 7.2 5 FKP2F014701I00 6.5 8 7.2 5 FKP2G014701I00 6800 6.5 8 7.2 5 FKP2F016801I00 7.2 8.5 7.2 5 FKP2G016801J00 0.01 mF 7.2 8.5 7.2 5 FKP2F021001J00 8.5 10 7.2 5 FKP2G021001L00 0.015 8.5 10 7.2 5 FKP2F021501L00 10 * AC voltage: f 1000 Hz 1.4 x U + UDC U rms r Part number completion: ** PCM = Printed circuit module = pin spacing. Z Tolerance: 20 % = M 10 % = K E12 values and individual values available 1 5 % = J 7 from 27 pF up on request. 5 2.5 % = H 3 W L 2 % = G Dims. in mm. 1.5 % = F 0.1 H 1 % = E 7 5 Packing: bulk = S 3 6 -2 Pin length: 6-2 = SD d = 0.5 l d Taped version see page 161. 5 0.01 PCM 1135 730 57100 1000 at thepin exit points f/MHz (0 .5) Impedance change with frequency (general guide). Rights reserved to amend design data without prior notification. Continuation page 36 35 06.21