FKS3G011003A00MSSD WIMA

D WIMA FKS 3 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm. Capacitances from 1000 pF to 0.22 mF. Rated Voltages from 100 VDC to 630 VDC. Special Features Electrical Data Pulse duty construction Capacitance range: Dissipation factors at +20+ C: tan d According to RoHS 2011/65/EU 1000 pF to 0.22 mF (E12-values on request) at f C 0,22 mF Rated voltages: 100 VDC, 250 VDC, 400 VDC, 630 VDC Typical Applications -3 1 kHz 7 x 10 Capacitance tolerances: -3 10 kHz 15 x10 20%, 10%, 5%, For general DC-applications e.g. -3 100 kHz 20 x 10 Operating temperature range: Coupling 55+ C to +105+ C Voltage derating: Decoupling Test specifications: A voltage derating factor of 1.25 % per K In accordance with IEC 60384-11 must be applied from +85+ C for DC Construction Climatic test category: voltages and from +75+ C for AC 55/100/56 in accordance with IEC voltages. Dielectric: Insulation resistance at +20+ C: Reliability: Polyethylene-terephthalate (PET) film 5 1 x 10 M Operational life 300 000 hours Capacitor electrodes: Measuring voltage: 100 V/1 min. Failure rate 5 fit (0.5 x U and 40+ C) r Metal foil Test voltage: 2 U , 2 sec. r Internal construction: Maximum pulse rise time: 1000 V/msec. Plastic film Metal foil electrode Terminating wire Mechanical Tests Packing Encapsulation: Pull test on pins: Available taped and reeled. Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 10 N in direction of pins according to Terminations: IEC 60068-2-21 Detailed taping information and graphs Vibration: at the end of the catalogue. Tinned wire. Marking: 6 hours at 10 ... 2000 Hz and 0.75 mm displacement amplitude or 10 g in Colour: Red. Marking: Black. accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 2 4000 bumps at 390 m/sec in For further details and graphs please accordance with IEC 60068-2-29 refer to Technical Information. 37 06.21D WIMA FKS 3 Continuation General Data 100 VDC/63 VAC* 250 VDC/160 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 3 8.5 10 7.5 FKS3D011002B00 3 8.5 10 7.5 FKS3F011002B00 1500 3 8.5 10 7.5 FKS3D011502B00 3 8.5 10 7.5 FKS3F011502B00 2200 3 8.5 10 7.5 FKS3D012202B00 3 8.5 10 7.5 FKS3F012202B00 3300 3 8.5 10 7.5 FKS3D013302B00 3 8.5 10 7.5 FKS3F013302B00 4700 3 8.5 10 7.5 FKS3D014702B00 3 8.5 10 7.5 FKS3F014702B00 3 9 13 10 FKS3F014703A00 6800 3 8.5 10 7.5 FKS3D016802B00 3 8.5 10 7.5 FKS3F016802B00 3 9 13 10 FKS3F016803A00 0.01 mF 3 8.5 10 7.5 FKS3D021002B00 3 9 13 10 FKS3F021003A00 3 9 13 10 FKS3D021003A00 0.015 3 8.5 10 7.5 FKS3D021502B00 4 9.5 13 10 FKS3F021503D00 3 9 13 10 FKS3D021503A00 0.022 3 8.5 10 7.5 FKS3D022202B00 5 11 13 10 FKS3F022203F00 3 9 13 10 FKS3D022203A00 0.033 4 9.5 13 10 FKS3D023303D00 6 12 13 10 FKS3F023303G00 0.047 4 9.5 13 10 FKS3D024703D00 6 12.5 18 15 FKS3F024704C00 0.068 5 11 13 10 FKS3D026803F00 7 14 18 15 FKS3F026804D00 0.1 mF 6 12 13 10 FKS3D031003G00 8 15 18 15 FKS3F031004F00 0.15 7 14 18 15 FKS3D031504D00 9 16 18 15 FKS3F031504J00 0.22 8 15 18 15 FKS3D032204F00 400 VDC/250 VAC* 630 VDC/300 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 3 9 13 10 FKS3G011003A00 3 9 13 10 FKS3J011003A00 1500 3 9 13 10 FKS3G011503A00 3 9 13 10 FKS3J011503A00 2200 3 9 13 10 FKS3G012203A00 3 9 13 10 FKS3J012203A00 3300 3 9 13 10 FKS3G013303A00 4 9.5 13 10 FKS3J013303D00 4700 3 9 13 10 FKS3G014703A00 4 9.5 13 10 FKS3J014703D00 6800 3 9 13 10 FKS3G016803A00 5 11 13 10 FKS3J016803F00 0.01 mF 4 9.5 13 10 FKS3G021003D00 6 12 13 10 FKS3J021003G00 0.015 5 11 13 10 FKS3G021503F00 6 12.5 18 15 FKS3J021504C00 0.022 6 12 13 10 FKS3G022203G00 7 14 18 15 FKS3J022204D00 0.033 6 12.5 18 15 FKS3G023304C00 8 15 18 15 FKS3J023304F00 0.047 7 14 18 15 FKS3G024704D00 0.068 8 15 18 15 FKS3G026804F00 0.1 mF 9 16 18 15 FKS3G031004J00 * AC voltage: f = 50 Hz 1.4 x U + UDC U rms r W L ** PCM = Printed circuit module = pin spacing. Part number completion: Tolerance: 20 % = M H Dims. in mm. 10 % = K 5 % = J 6 -2 The values of the WIMA FKM 3 range Packing: bulk = S d according to the main catalogue 2009 PCM Pin length: 6-2 = SD are still available on request. at the pin exit points ( 0.4) Taped version see page 161. d = 0.5 P if W = 3 PCM 7.5 and 10 d = 0.6 P if W 4 d = 0.8 P if PCM = 15 Rights reserved to amend design data without prior notification. Continuation page 39 38 06.21