D
WIMA MKP 10
Polypropylene (PP) Capacitors for Pulse Applications with
Double-Sided Metallized Electrodes in PCM 7.5 mm to 52.5 mm. Capacitances
from 1000 pF to 47 mF. Rated Voltages from 100 VDC to 3000 VDC.
Special Features Electrical Data
Pulse duty construction Capacitance range: Climatic test category:
Self-healing 1000 pF to 47 mF (E12-values on request) 55/100/56 in accordance with IEC
Very low dissipation factor Rated voltages: 100 VDC, 250 VDC, 400 VDC, Dielectric absorption: 0.05 %
Negative capacitance change 630 VDC, 850 VDC, 1000 VDC, 1250 VDC, Voltage derating:
versus temperature 1600 VDC, 2000 VDC, 2500 VDC, 3000 VDC A voltage derating factor of 1.35 % per K
According to RoHS 2011/65/EU Capacitance tolerances: must be applied from +85+ C for DC
20%, 10%, 5% voltages and from +75+ C for AC
Operating temperature range: voltages.
Typical Applications
55) C to +110) C Reliability:
Insulation resistance at +20+ C: Operational life 300 000 hours
For pulse applications e.g.
5
C T 0.33 mF: 1 x 10 M Failure rate 1 fit (0.5 x U and 40) C)
Switch mode power supplies r
C 0.33 mF: 30 000 sec (M x mF) Specific dissipation:
TV and monitor sets
Measuring voltage: 100 V/1 min.
Lighting
Box size* Specific dissipation in Watts per K
Test voltage: 2 sec.
Audio/video equipment
W x H x L in mm above the ambient temperature
L T 2000 VDC 2500 VDC 3000 VDC
35 x 50 x 57 0.132
Construction
45 x 55 x 57 0.164
41.5 1.6 U 1.4 U 1.2 U
r r r
45 x 65 x 57 0.184
41.5 1.4 U 1.4 U 1.2 U
r r r
Dielectric: Polypropylene (PP) film
57 1.2 U 1.2 U 1.2 U
r r r
* other box sizes see page 11.
Capacitor electrodes:
Dissipation factors at + 20) C: tan d
Double-sided metallized plastic film
Internal construction: at f C T 0.1 mF 0.1 mF < C T 1.0 mF C > 1.0 mF
-4 -4 -4
1 kHz T 6 x 10 T 6 x 10 T 6 x 10
MKP10: 63 VAC, 180VAC, 250 VAC, 280 VAC
-4 -4
10 kHz T 6 x 10 T 6 x 10
Plastic film
-4
100 kHz T 15 x 10
Electrode carrier
plastic film metallized
on both sides
Maximum pulse rise time for pulses equal to the rated voltage
Metal contact layer
(schoopage)
Capacitance max. pulse rise time V/msec at T < 40) C
A
Terminating wire pF/mF 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 2500 VDC 3000 VDC
1000 ... 2200 1250 2300 2300 2300 3500 3500 7000 7000 11500 11500
3300 ... 6800 1150 1500 1500 1500 3500 3500 7000 7000 11500 11500
MKP10: 400VAC,600 VAC, 650 VAC, 700 VAC
0.01 ... 0.022 900 1400 1500 1500 2700 2700 3800 3800 4400 11500
Plastic film
0.033 ... 0.068 500 1000 1150 1400 2700 2700 2700 2700 2700 2700 2700
Electrode carrier
plastic film metallized
0.1 ... 0.22 250 650 650 1150 1800 1800 1800 1800 1800 1800 1800
on both sides
0.33 ... 0.68 130 390 500 900 1150 1150 1150 1150 1150 1150 1150
Plastic film metallized
on one side
1.0 ... 2.2 90 250 250 500 500 500 650 650 650 650 500
Metal contact layer 3.3 ... 4.7 65 100 130 190 230 230 330 330
(schoopage)
6.8 ... 15 45 65 90 160
Terminating wire
22 ... 47 30 45 45
MKP10: 900VAC (PCM15= 3-section)
Encapsulation:
Plastic film
Solvent-resistant, flame-retardant Electrodeplasticcarrier
Mechanical Tests Packing
plastic film metallized
case with epoxy resin seal, UL 94 V-0
on both sides
Terminations: Tinned wire.
Plastic film metallized
Pull test on pins: Available taped and reeled up to and
on one side
Marking: Colour: Red.
d T 0.8 l: 10 N in direction of pins including case size 15 x 26 x 31.5 /
Metal contact layer
Marking: Black.
(schoopage) d > 0.8 l: 20 N in direction of pins PCM 27.5 mm.
Terminating wire according to IEC 60068-2-21
Vibration: 6 hours at 10 ... 2000 Hz and Detailed taping information and graphs
0.75 mm displacement amplitude or 10 g at the end of the catalogue.
in accordance with IEC 60068-2-6
Low air density: 1kPa = 10 mbar in
accordance with IEC 60068-2-13
2
Bump test: 4000 bumps at 390 m/sec For further details and graphs please
in accordance with IEC 60068-2-29 refer to Technical Information.
65
05.19D
WIMA MKP 10
Continuation
General Data
100 VDC/63 VAC* 250 VDC/180 VAC*
Capacitance
PCM** Part number W H L PCM** Part number
W H L
1000 pF 4 9 10 7.5 MKP1D011002C_ _ _ _ _ _ 4 9 10 7.5 MKP1F011002C_ _ _ _ _ _
1500 4 9 10 7.5 MKP1D011502C_ _ _ _ _ _ 4 9 10 7.5 MKP1F011502C_ _ _ _ _ _
2200 4 9 10 7.5 MKP1D012202C_ _ _ _ _ _ 4 9 10 7.5 MKP1F012202C_ _ _ _ _ _
3300 4 9 10 7.5 MKP1D013302C_ _ _ _ _ _ 4 9 10 7.5 MKP1F013302C_ _ _ _ _ _
4700 4 9 10 7.5 MKP1D014702C_ _ _ _ _ _ 4 9 10 7.5 MKP1F014702C_ _ _ _ _ _
6800 4 9 10 7.5 MKP1D016802C_ _ _ _ _ _ 4 9 10 7.5 MKP1F016802C_ _ _ _ _ _
0.01 mF 4 9 10 7.5 MKP1D021002C_ _ _ _ _ _ 4 9 10 7.5 MKP1F021002C_ _ _ _ _ _
4 9 13 10 MKP1F021003C_ _ _ _ _ _
0.015 4 9 10 7.5 MKP1D021502C_ _ _ _ _ _ 4 9 10 7.5 MKP1F021502C_ _ _ _ _ _
4 9 13 10 MKP1F021503C_ _ _ _ _ _
0.022 4 9 10 7.5 MKP1D022202C_ _ _ _ _ _ 4 9 10 7.5 MKP1F022202C_ _ _ _ _ _
4 9 13 10 MKP1F022203C_ _ _ _ _ _
0.033 5 10.5 10.3 7.5 MKP1D023302E_ _ _ _ _ _ 5 10.5 10.3 7.5 MKP1F023302E_ _ _ _ _ _
4 9 13 10 MKP1D023303C_ _ _ _ _ _ 4 9 13 10 MKP1F023303C_ _ _ _ _ _
0.047 5 10.5 10.3 7.5 MKP1D024702E_ _ _ _ _ _ 5 10.5 10.3 7.5 MKP1F024702E_ _ _ _ _ _
4 9 13 10 MKP1D024703C_ _ _ _ _ _ 4 9 13 10 MKP1F024703C_ _ _ _ _ _
0.068 5 11 13 10 MKP1D026803F_ _ _ _ _ _ 5 11 13 10 MKP1F026803F_ _ _ _ _ _
5 11 18 15 MKP1F026804B_ _ _ _ _ _
0.1 mF 6 12 13 10 MKP1D031003G_ _ _ _ _ _ 6 12 13 10 MKP1F031003G_ _ _ _ _ _
5 11 18 15 MKP1F031004B_ _ _ _ _ _
0.15 6 12.5 18 15 MKP1D031504C_ _ _ _ _ _ 6 12.5 18 15 MKP1F031504C_ _ _ _ _ _
6 15 26.5 22.5 MKP1F031505B_ _ _ _ _ _
0.22 7 14 18 15 MKP1D032204D_ _ _ _ _ _ 7 14 18 15 MKP1F032204D_ _ _ _ _ _
6 15 26.5 22.5 MKP1F032205B_ _ _ _ _ _
0.33 8 15 18 15 MKP1D033304F_ _ _ _ _ _ 8 15 18 15 MKP1F033304F_ _ _ _ _ _
6 15 26.5 22.5 MKP1F033305B_ _ _ _ _ _
0.47 9 16 18 15 MKP1D034704J_ _ _ _ _ _ 9 16 18 15 MKP1F034704J_ _ _ _ _ _
7 16.5 26.5 22.5 MKP1D034705D_ _ _ _ _ _ 7 16.5 26.5 22.5 MKP1F034705D_ _ _ _ _ _
0.68 8.5 18.5 26.5 22.5 MKP1D036805F_ _ _ _ _ _ 8.5 18.5 26.5 22.5 MKP1F036805F_ _ _ _ _ _
9 19 31.5 27.5 MKP1F036806A_ _ _ _ _ _
1.0 mF 10.5 19 26.5 22.5 MKP1D041005G_ _ _ _ _ _ 11 21 26.5 22.5 MKP1F041005I_ _ _ _ _ _
11 21 31.5 27.5 MKP1F041006B_ _ _ _ _ _
1.5 11 21 31.5 27.5 MKP1D041506B_ _ _ _ _ _ 13 24 31.5 27.5 MKP1F041506D_ _ _ _ _ _
13 24 41.5 37.5 MKP1F041507C_ _ _ _ _ _
2.2 13 24 31.5 27.5 MKP1D042206D_ _ _ _ _ _ 15 26 31.5 27.5 MKP1F042206F_ _ _ _ _ _
13 24 41.5 37.5 MKP1F042207C_ _ _ _ _ _
3.3 17 29 31.5 27.5 MKP1D043306G_ _ _ _ _ _ 17 34.5 31.5 27.5 MKP1F043306I_ _ _ _ _ _
17 29 41.5 37.5 MKP1F043307E_ _ _ _ _ _
4.7 20 39.5 31.5 27.5 MKP1D044706J_ _ _ _ _ _ 20 39.5 31.5 27.5 MKP1F044706J_ _ _ _ _ _
17 29 41.5 37.5 MKP1D044707E_ _ _ _ _ _ 19 32 41.5 37.5 MKP1F044707F_ _ _ _ _ _
6.8 19 32 41.5 37.5 MKP1D046807F_ _ _ _ _ _ 20 39.5 41.5 37.5 MKP1F046807G_ _ _ _ _ _
10 mF 20 39.5 41.5 37.5 MKP1D051007G_ _ _ _ _ _ 24 45.5 41.5 37.5 MKP1F051007H_ _ _ _ _ _
15 24 45.5 41.5 37.5 MKP1D051507H_ _ _ _ _ _ 35 50 41.5 37.5 MKP1F051507J_ _ _ _ _ _
31 46 41.5 37.5 MKP1D051507I_ _ _ _ _ _ 35 50 57 52.5 MKP1F051509F_ _ _ _ _ _
22 35 50 41.5 37.5 MKP1D052207J_ _ _ _ _ _ 35 50 57 52.5 MKP1F052209F_ _ _ _ _ _
33 40 55 41.5 37.5 MKP1D053307K_ _ _ _ _ _ 45 65 57 52.5 MKP1F053309J_ _ _ _ _ _
35 50 57 52.5 MKP1D053309F_ _ _ _ _ _
47 45 65 57 52.5 MKP1D054709J_ _ _ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x U + UDC T U
rms r
Part number completion:
** PCM = Printed circuit module = pin spacing
Version code: 2-pin = 00
4-pin = D4
Dims. in mm.
Tolerance: 20 % = M
10 % = K
Ionisation inception level in isolated cases may
5 % = J
be lower than admissible rated AC voltage.
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 149.
Rights reserved to amend design data without prior notification.
Continuation page 67
66
01.19