MKX21W31004C00MSSD WIMA

D WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Electrical Data Reliable self-healing Capacitance range: 1000 pF to 2.2 mF Test specifications: High degree of interference Rated voltage: 275 VAC In accordance with IEC 60384-14 suppression due to good Continuous DC voltage* (general guide): Maximum pulse rise time: attenuation and low ESR T 560 V 100 V/msec for pulses equal to a voltage According to RoHS 2011/65/EC Capacitance tolerances: 20%, 10% amplitude with 2 x 275 VAC = 390 V Operating temperature range: according to IEC 60384-14 55) C to +105) C Test voltage: Typical Applications Climatic test category: C T 1.0 mF: 2260 VDC, 2 sec. 55/105/56/B in accordance with IEC C 1.0 mF: 1800 VDC, 2 sec. Class X2 RFI applications to meet Insulation resistance at +20+ C: Reliability: EMC regulations 3 C T 0.33 mF: 15 x 10 M Operational life 300 000 hours Capacitors connected to the mains C 0.33 mF: 5000 sec (M x mF) Failure rate 2 fit (0.5 x U and 40) C) between phase and neutral or r Measuring voltage: 100 V/1 min. phase conductors Dissipation factors at + 20) C: tan d Installation category II in accordance with IEC 60664, at f C T 0.1 mF 0.1 mF < C T 1.0 mF C > 1.0 mF pulse peak voltage T 2.5 kV -4 -4 -4 1 kHz T 10 x 10 T 20 x 10 T 30 x 10 -4 -4 10 kHz T 20 x 10 T 60 x 10 Construction -4 100 kHz T 90 x 10 Approvals: Dielectric: Polypropylene (PP) film Country Authority Specification Symbol Approval-No. Capacitor electrodes: Germany VDE IEC 60384-14/3 40003472 Vacuum-deposited Internal construction: USA/Canada UL UL 1414 (250 VAC) E 134915 C 22.2 No. 1 (250 VAC) Plastic film USA/Canada UL UL 1283 (305 VAC) E 100438 Vacuum-deposited C 22.2 No. 8 (305 VAC) electrode Metal contact layer (schoopage) Terminating wire Mechanical Tests Packing Pull test on pins: 10 N in direction of pins Available taped and reeled up to and according to IEC 60068-2-21 including case size 15 x 26 x 31.5 / Vibration: 6 hours at 10 ... 2000 Hz and PCM 27.5 mm. Encapsulation: 0.75 mm displacement amplitude or 10 g Solvent-resistant, flame-retardant plastic in accordance with IEC 60068-2-6 Detailed taping information and graphs case with epoxy resin seal, UL 94 V-0 Low air density: 1kPa = 10 mbar in at the end of the catalogue. Terminations: accordance with IEC 60068-2-13 Tinned wire. 2 Bump test: 4000 bumps at 390 m/sec in For further details and graphs please Marking: accordance with IEC 60068-2-29 refer to Technical Information. Colour: Red. Marking: Black. * If safety-approved EMI suppression capacitors are operated with a DC vol- tage being above the specified AC voltage rating the given approvals are no longer valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 71 11.12 D WIMA MKP-X2 Continuation General Data 275 VAC* 305 VAC* Capacitance Part number Part number W H L PCM** W H L PCM** 1000 pF 4 9 10 7.5 MKX21W11002C00 1500 4 9 10 7.5 MKX21W11502C00 2200 4 9 10 7.5 MKX21W12202C00 3300 4 9 10 7.5 MKX21W13302C00 4700 4 9 10 7.5 MKX21W14702C00 6800 4 9 10 7.5 MKX21W16802C00 0.01 mF 4 9 10 7.5 MKX21W21002C00 5 11 13 10 MKX21W21003F00 0.015 7.5 4 9 10 MKX21W21502C00 5 11 13 10 MKX2AW21503F00 5 11 13 10 MKX21W21503F00 0.022 4 9 10 7.5 MKX21W22202C00 5 11 13 10 MKX2AW22203F00 5 11 13 10 MKX21W22203F00 7.5 7.5 0.033 5 10.5 10.3 MKX21W23302E00 5 10.5 10.3 MKX2AW23302E00 5 11 13 10 MKX21W23303F00 5 11 13 10 MKX2AW23303F00 0.047 5.7 12.5 10.3 7.5 MKX21W24702F00 5.7 12.5 10.3 7.5 MKX2AW24702F00 6 12.5 13 10 MKX21W24703H00 6 12.5 13 10 MKX2AW24703H00 0.068 6 12.5 13 10 MKX21W26803H00 6 12.5 13 10 MKX2AW26803H00 0.1 mF 8 12 13 10 MKX21W31003I00 8 12 13 10 MKX2AW31003I00 5 11 18 15 MKX21W31004B00 5 11 18 15 MKX2AW31004B00 6 12.5 18 15 MKX21W31004C00 6 12.5 18 15 MKX2AW31004C00 0.15 6 12.5 18 15 MKX21W31504C00 6 12.5 18 15 MKX2AW31504C00 7 14 18 15 MKX21W31504D00 7 14 18 15 MKX2AW31504D00 0.22 9 14 18 15 MKX21W32204H00 8 15 18 15 MKX2AW32204F00 8 15 18 15 MKX21W32204F00 0.33 11 14 18 15 MKX21W33304M00 9 16 18 15 MKX2AW33304J00 9 16 18 15 MKX21W33304J00 0.47 8.5 18.5 26.5 22.5 MKX21W34705F00 8.5 18.5 26.5 22.5 MKX2AW34705F00 10.5 19 26.5 22.5 MKX21W34705G00 10.5 19 26.5 22.5 MKX2AW34705G00 0.68 10.5 19 26.5 22.5 MKX21W36805G00 10.5 19 26.5 22.5 MKX2AW36805G00 11 21 26.5 22.5 MKX21W36805I00 11 21 26.5 22.5 MKX2AW36805I00 1.0 mF 11 21 26.5 22.5 MKX21W41005I00 11 21 26.5 22.5 MKX2AW41005I00 13 24 31.5 27.5 MKX21W41006D00 13 24 31.5 27.5 MKX2AW41006D00 1.5 15 26 31.5 27.5 MKX21W41506F00 15 26 31.5 27.5 MKX2AW41506F00 2.2 17 29 31.5 27.5 MKX21W42206G00 * f = 50/60 Hz W L Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M H 10 % = K Certified for 250 VAC in accordance with UL/CSA. Packing: bulk = S 6 -2 d Pin length: 6-2 = SD PCM Dims. in mm. at the pin exit points Taped version see page 148. ( 0.4) d = 0.6 l if PCM 15 d = 0.8 l if PCM 15 Rights reserved to amend design data without prior notification. 72 11.12