MKX2AW41006D00KSSD WIMA

D WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pF to 10 mF. Rated Voltage 305 VAC. Special Features Electrical Data Reliable self-healing Capacitance range: 1000 pF to 10 mF Insulation resistance at +20+ C: 4 High degree of interference Rated voltage: 305 VAC C T 0.33 mF: 1.5 x 10 M suppression due to good Continuous DC voltage* (general guide): C 0.33 mF: 5000 sec (M x mF) attenuation and low ESR T 560 V Measuring voltage: 100 V/1 min. AEC-Q200 qualified Capacitance tolerances: Maximum pulse rise time: for PCM 15 mm 20%, 10%, 5% 100 V/msec for pulses equal to a voltage According to RoHS 2011/65/EU Operating temperature range: amplitude with 2 x 305 VAC = 432 V 55) C to +105) C according to IEC 60384-14 Climatic test category: Test voltage: Typical Applications 55/105/56 in accordance with IEC C T 1.0 mF: 2260 VDC, 2 sec. Passive flammability class: C 1.0 mF: 1800 VDC, 2 sec. Class X2 RFI applications to meet 3 B for capacitors with V 1750 mm Reliability: EMC regulations 3 C for capacitors with V T 1750 mm Operational life 300 000 hours Capacitors connected to the mains Test specifications: Failure rate 2 fit (0.5 x U and 40) C) between phase and neutral or r In accordance with IEC 60384-14 phase conductors Dissipation factors at + 20) C: tan d General requirements, pulse peak voltage T 2.5 kV at f C T 0.1 mF 0.1 mF < C T 1.0 mF C > 1.0 mF -4 -4 -4 1 kHz T 18 x 10 T 20 x 10 T 20 x 10 Construction -4 -4 10 kHz T 20 x 10 T 60 x 10 -4 100 kHz T 50 x 10 Dielectric: Approvals: Polypropylene (PP) film Capacitor electrodes: Country Authority Specification Symbol Approval-No. Vacuum-deposited Germany VDE IEC 60384-14/4 40003472 Internal construction: USA/Canada UL UL 60384-14 E 134915 CAN/CSA-E60384-14 Plastic film Vacuum-deposited electrode China CQC CQC11-471115-2016 CQC20001271097 Metal contact layer (schoopage) Terminating wire Mechanical Tests Packing Pull test on pins: 10 N in direction of pins Available taped and reeled up to and according to IEC 60068-2-21 including case size 15 x 26 x 31.5 / Encapsulation: Vibration: 6 hours at 10 ... 2000 Hz and PCM 27.5 mm. Solvent-resistant, flame-retardant plastic 0.75 mm displacement amplitude or 10 g case with epoxy resin seal, UL 94 V-0 in accordance with IEC 60068-2-6 Detailed taping information and graphs Terminations: Low air density: 1kPa = 10 mbar in at the end of the catalogue. Tinned wire. accordance with IEC 60068-2-13 2 Marking: Bump test: 4000 bumps at 390 m/sec in For further details and graphs please Colour: Red. Marking: Black. accordance with IEC 60068-2-29 refer to Technical Information. * If safety-approved EMI suppression capacitors are operated with a DC vol- tage being above the specified AC voltage rating the given approvals are no longer valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 88 06.21D WIMA MKP-X2 Continuation General Data 305 VAC* Capacitance Part number W H L PCM** 1000 pF 4 9 10 7.5 MKX2AW11002C00 1200 4 9 10 7.5 MKX2AW11202C00 1500 4 9 10 7.5 MKX2AW11502C00 1800 4 9 10 7.5 MKX2AW11802C00 2200 4 9 10 7.5 MKX2AW12202C00 2700 4 9 10 7.5 MKX2AW12702C00 3300 4 9 10 7.5 MKX2AW13302C00 3900 4 9 10 7.5 MKX2AW13902C00 4700 4 9 10 7.5 MKX2AW14702C00 5600 4 9 10 7.5 MKX2AW15602C00 6800 4 9 10 7.5 MKX2AW16802C00 8200 4 9 10 7.5 MKX2AW18202C00 0.01 mF 4 9 10 7.5 MKX2AW21002C00 5 11 13 10 MKX2AW21003F00 0.012 4 9 10 7.5 MKX2AW21202C00 5 11 13 10 MKX2AW21203F00 0.015 4 9 10 7.5 MKX2AW21502C00 5 11 13 10 MKX2AW21503F00 0.018 4 9 10 7.5 MKX2AW21802C00 5 11 13 10 MKX2AW21803F00 0.022 4 9 10 7.5 MKX2AW22202C00 5 11 13 10 MKX2AW22203F00 0.027 5 10.5 10.3 7.5 MKX2AW22702E00 5 11 13 10 MKX2AW22703F00 0.033 5 10.5 10.3 7.5 MKX2AW23302E00 5 11 13 10 MKX2AW23303F00 0.039 5.7 12.5 10.3 7.5 MKX2AW23902F00 5 11 13 10 MKX2AW23903F00 0.047 5.7 12.5 10.3 7.5 MKX2AW24702F00 6 12.5 13 10 MKX2AW24703H00 5 11 18 15 MKX2AW24704B00 0.056 6 12.5 13 10 MKX2AW25603H00 5 11 18 15 MKX2AW25604B00 0.068 6 12.5 13 10 MKX2AW26803H00 5 11 18 15 MKX2AW26804B00 0.082 6 12.5 13 10 MKX2AW28203H00 5 11 18 15 MKX2AW28204B00 * f = 50/60 Hz Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M 10 % = K Dims. in mm. 5 % = J Packing: bulk = S Pin length: 6-2 = SD d = 0.6 P if PCM 15 Taped version see page 161. d = 0.8 P if PCM 15 Rights reserved to amend design data without prior notification. Continuation page 90 89 06.21