D WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Electrical Data Particularly high reliability against Capacitance range: Maximum pulse rise time: active and passive flammability 1000 pF to 1.0 mF (E12-values on request) Capacitance Pulse rise time V/msec Excellent self-healing as well as Rated voltages: pF/mF max. operation high voltage strength 250 VAC, 275 VAC 1000 1000 High degree of interference Capacitance tolerances: 1500 600 suppression due to good 20% 2200 ... 4700 450 attenuation and low ESR Operating temperature range: 6800 ... 0.022 300 For temperatures up to +110 C 40) C to +110) C 0.033 ... 0.047 200 According to RoHS 2002/95/EC Climatic test category: 0.068 ... 1.0 100 40/110/56/C in accordance with IEC Insulation resistance at +20+ C: Typical Applications for pulses equal to the rated voltage, 3 C 0.33 mF: 12 x 10 M U = 390 V pp C > 0.33 mF: 4000 sec (M x mF) Test voltage: 2700 VDC, 2 sec. Class X2 RFI applications to meet Measuring voltage: 100 V/1 min. Reliability: EMC regulations Dissipation factors: Operational life > 300 000 hours Capacitors connected to the mains 3 tan d 13 x 10 at 1 kHz and +20+ C Failure rate < 1 fit (0.5 x U and 40) C) between phase and neutral or r Test specifications: phase and phase conductors In accordance with DIN EN 132 400 Installation category II in Approvals: accordance with IEC 60664, pulse peak voltage 2.5 kV Approval-No. Approval-No. Country Authority Specification Symbol 250 VAC 275 VAC Construction V Germany VDE DIN EN 132 400 89749 89749 D E IEC 60384-14/2 Dielectric: EN 132 400 Paper, epoxy resin impregnated USA UL UL 1283 E 100438 E 100438 Capacitor electrodes: Vacuum-deposited Canada CSA C 22.2 No. 8 LR 93312-1 LR 93312-1 Internal construction: Capacitor paper Vacuum-deposited Mounting Recommendation Packing electrode Metal contact layer (schoopage) To minimize or avoid shock and/or Available taped and reeled up to and Terminating wire vibration stresses to terminating wires including PCM 22.5 mm. and solder connections we recommend to fix voluminous resin-potted MP capacitors Detailed taping information and graphs as from e.g. PCM 22.5 mm in an at the end of the catalogue. Encapsulation: appropriate way since for constructional Self-extinguishing epoxy resin, UL 94 V-0, reasons they do not sit tight on the For further details and graphs please board. refer to Technical Information. metal foil Terminations: Tinned wire. Marking: Marking: Black on Silver. 91 10.050.47 -- -- -- 1.0F PCM275 0.15 -- 0.22 -- -- 0.33F PCM 22.5 -- 1000 pF -- 2200 pF PCM 10 -- 4700 pF -- 6800 pF -- 0.01 F -- 0.022 F PCM 15 -- 0.047 F -- 0.1 F D WIMA MP 3-X2 Continuation General Data 250 VAC* 275 VAC* Capacitance W H L PCM** W H L PCM** 1000 pF 4 8.5 13.5 10 4 8.5 13.5 10 1500 4 8.5 13.5 10 4 8.5 13.5 10 2200 4 8.5 13.5 10 4 8.5 13.5 10 3300 4 8.5 13.5 10 4 8.5 13.5 10 4700 5 10 13.5 10 5 10 13.5 10 6800 5 1319 15 5 131915 0.01 mF 5 1319 15 5 131915 0.015 5 13 19 15 5 13 19 15 0.022 5 1319 15 5 131915 0.033 6 1419 15 6 141915 0.047 715 19 15 715 19 15 0.068 8 1719 15 8 171915 0.1 mF10 18 19 15* 10 18 19 15* 820 28 22.5* 8 202822.5* 0.15 8 20 28 22.5 8 20 28 22.5 0.22 102228 22.5 10222822.5 0.33 122428 22.5 12242822.5 0.47 132533 27.5 13253327.5 0.68 152633 27.5 15263327.5 1.0 mF 203233 27.5 20323327.5 10 * f = 50/60 Hz Z ** PCM = Printed circuit module = lead spacing 1 7 Upon request with long leads 35-2 mm max. 5 3 * On ordering please state the required PCM (lead spacing). 0.1 7 If not specified, smaller PCM will be booked. 5 3 Dims. in mm. 0.01 0.1 357 1 3 57 10 3 57 100 1000 f/MHz Taped version see page 100. Impedance change with frequency (general guide) W L H 6-2 d = 0.7 P if PCM 10 d PCM at the lead exit d = 0.8 P if PCM 15 points Rights reserved to amend design data without prior notification. ( 0.5) 92 10.05