MPX21W1330FA00MSSD WIMA

D WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Electrical Data Particularly high reliability against Capacitance range: Maximum pulse rise time: active and passive flammability 1000 pF to 1.0 mF (E12-values on request) Capacitance Pulse rise time V/msec Excellent self-healing as well as Rated voltages: 250 VAC, 275 VAC pF/mF max. operation high voltage strength Continuous DC voltage* (general guide): 1000 1100 High degree of interference T 630 V 1500 1100 suppression due to good Capacitance tolerances: 20% 2200 ... 4700 500 attenuation and low ESR Operating temperature range: 6800 ... 0.022 300 For temperatures up to +110 C 40) C to +110) C 0.033 ... 0.047 200 According to RoHS 2011/65/EC Climatic test category: 0.068 ... 1.0 100 40/110/56/C in accordance with IEC Insulation resistance at +20+ C: Typical Applications for pulses equal to a voltage amplitude 3 C T 0.33 mF: 12 x 10 M with 2 x UAC = 390 V C 0.33 mF: 4000 sec (M x mF) according to IEC 60384-14 Class X2 RFI applications to meet Measuring voltage: 100 V/1 min. Test voltage: 2700 VDC, 2 sec. EMC regulations Dissipation factors: Reliability: Capacitors connected to the mains 3 tan d T 13 x 10 at 1 kHz and +20+ C Operational life 300 000 hours between phase and neutral or Test specifications: Failure rate 1 fit (0.5 x U and 40) C) phase and phase conductors r In accordance with IEC 60384-14 Installation category II in Approvals: accordance with IEC 60664, pulse peak voltage T 2.5 kV Approval-No. Approval-No. Country Authority Specification Symbol 250 VAC 275 VAC Construction V Germany VDE IEC 60384-14/3 89749 89749 D E Dielectric: EN 132 400 Paper, epoxy resin impregnated USA UL UL 1283 E 100438 E 100438 Capacitor electrodes: Vacuum-deposited Canada CSA C 22.2 No. 8 LR 93312-1 LR 93312-1 Internal construction: Capacitor paper Vacuum-deposited Mounting Recommendation Packing electrode Metal contact layer (schoopage) To minimize or avoid shock and/or Available taped and reeled up to and Terminating wire vibration stresses to terminating wires including PCM 22.5 mm. and solder connections we recommend to fix voluminous resin-potted MP capacitors Detailed taping information and graphs as from e.g. PCM 22.5 mm in an at the end of the catalogue. appropriate way since for constructional Encapsulation: reasons they do not sit tight on the For further details and graphs please Self-extinguishing epoxy resin, UL 94 V-0, board. refer to Technical Information. metal foil Terminations: Tinned wire. * If safety-approved EMI suppression Marking: capacitors are operated with a DC vol- Marking: Black on Silver. tage being above the specified AC voltage rating the given approvals are no longer valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 77 11.12 0.47 -- -- -- 1. 0 F PCM 275 0.15 -- 0.22 -- -- 0.33 F PCM 22. 5 -- 1000 pF -- 2200 pF PCM 10 -- 4700 pF -- 6800 pF -- 0.01 F -- 0.022 F PCM 15 -- 0.047 F -- 0.1 F D WIMA WIMA MP FKP 3-X24 Continuation General Data 250 VAC* 275 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 4 8.5 13.5 10 MPX20W1100FA00 4 8.5 13.5 10 MPX21W1100FA00 1500 4 8.5 13.5 10 MPX20W1150FA00 4 8.5 13.5 10 MPX21W1150FA00 2200 4 8.5 13.5 10 MPX20W1220FA00 4 8.5 13.5 10 MPX21W1220FA00 3300 4 8.5 13.5 10 MPX20W1330FA00 4 8.5 13.5 10 MPX21W1330FA00 4700 5 10 13.5 10 MPX20W1470FB00 5 10 13.5 10 MPX21W1470FB00 6800 5 13 19 15 MPX20W1680FC00 5 13 19 15 MPX21W1680FC00 0.01 mF 5 13 19 15 MPX20W2100FC00 5 13 19 15 MPX21W2100FC00 0.015 5 13 19 15 MPX20W2150FC00 5 13 19 15 MPX21W2150FC00 0.022 5 13 19 15 MPX20W2220FC00 5 13 19 15 MPX21W2220FC00 0.033 6 14 19 15 MPX20W2330FD00 6 14 19 15 MPX21W2330FD00 0.047 7 15 19 15 MPX20W2470FE00 7 15 19 15 MPX21W2470FE00 0.068 8 17 19 15 MPX20W2168FF00 8 17 19 15 MPX21W2680FF00 0.1 mF 10 18 19 15 MPX20W3100FG00 10 18 19 15 MPX21W3100FG00 8 20 28 22.5 MPX20W3100FH00 8 20 28 22.5 MPX21W3100FH00 0.15 8 20 28 22.5 MPX20W3150FH00 8 20 28 22.5 MPX21W3150FH00 0.22 10 22 28 22.5 MPX20W3220FI00 10 22 28 22.5 MPX21W3220FI00 0.33 12 24 28 22.5 MPX20W3330FJ00 12 24 28 22.5 MPX21W3330FJ00 0.47 13 25 33 27.5 MPX20W3470FK00 13 25 33 27.5 MPX21W3470FK00 0.68 15 26 33 27.5 MPX20W3680FL00 15 26 33 27.5 MPX21W3680FL00 1.0 mF 20 32 33 27.5 MPX20W4100FM00 20 32 33 27.5 MPX21W4100FM00 * f = 50/60 Hz Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M Upon request with long pins 35-2 mm max. Packing: bulk = S Pin length: 6-2 = SD Dims. in mm. Taped version see page 148. W L 10 Z H 1 7 5 3 d = 0.6 P if PCM 10 6 -2 0.1 d = 0.8 P if PCM 15 d PCM 7 at the pin exit 5 points 3 (0.5) 0.01 0.1 3 5 7 1 3 5 7 10 3 5 7 100 1000 f/MHz Impedance change with frequency (general guide) Rights reserved to amend design data without prior notification. 78 11.12