MPY20W2150FD00MSSD WIMA

D WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pF to 0.1 mF. Rated Voltages 250 VAC and 300 VAC. Special Features Electrical Data Particularly high reliability against Capacitance range: Maximum pulse rise time 250 VAC: active and passive flammability 1000 pF to 0.1 mF (E12-values on request) Capacitance Pulse rise time V/msec Excellent self-healing as well as Rated voltages: pF/mF max. operation high voltage strength 250 VAC, 300 VAC 1000 ... 4700 2500 Twice the safety by internal Continuous DC voltage* (general guide): 6800 ... 0.022 1750 series connection (300 VAC) 250 VAC: 1000 V High degree of interference 300 VAC: 1250 V Maximum pulse rise time 300 VAC: suppression due to good Capacitance tolerances: 20% Capacitance Pulse rise time V/msec attenuation and low ESR Operating temperature range: pF/mF max. operation For temperatures up to +110 C 40) C to +110) C 1000 ... 4700 2500 According to RoHS 2011/65/EU Climatic test category: 6800 ... 0.015 1850 250 VAC: 40/110/56/C 0.022 ... 0.1 600 300 VAC: 40/110/56/B Typical Applications in accordance with IEC for pulses equal to a voltage amplitude Insulation resistance at +20+ C: with 2 x 250 VAC = 355 V Class Y2 RFI applications to meet 3 12 x 10 M with 2 x 300 VAC = 425 V EMC regulations Measuring voltage: 100 V/1 min. according to IEC 60384-14 Capacitors connected to the mains Dissipation factors: Test voltage: 2400 VDC, 2sec. between phase or neutral and 3 tan d 13 x 10 at 1 kHz and +20+ C Reliability: earthed casing Test specifications: Operational life 300 000 hours By-passing of the basic or Failure rate 1 fit (0.5 x U and 40) C) in accordance with IEC 60384-14 supplementary insulation, r Approvals: pulse peak voltage 5 kV Authority Specification Symbol Approval-No. Construction UL/Demko EN 60384-14 ENEC-02833 (250 VAC) 5 ENEC-02399 (300 VAC) Dielectric: UL UL 60384-14 E 100438 Paper, epoxy resin impregnated CAN/CSA-E60384-14 Capacitor electrodes: Vacuum-deposited Internal construction: 250 VAC Mechanical Tests Packing Capacitor paper Pull test on pins: 10 N in direction of pins Available taped and reeled. Vacuum-deposited according to IEC 60068-2-21 electrode Metal contact layer Vibration: 6 hours at 10 ... 2000 Hz and Detailed taping information and graphs (schoopage) 0.75 mm displacement amplitude or 10 g at the end of the catalogue. Terminating wire in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in For further details and graphs please accordance with IEC 60068-2-13 refer to Technical Information. 300 VAC 2 Bump test: 4000 bumps at 390 m/sec in Capacitor paper accordance with IEC 60068-2-29 Vacuum-deposited electrode Metal contact layer * If safety-approved EMI suppression (schoopage) capacitors are operated with a DC vol- Terminating wire tage being above the specified AC voltage rating the given approvals are no longer valid (IEC 60384-14). Encapsulation: Furthermore the permissible pulse rise time Self-extinguishing epoxy resin, UL 94 V-0. du/dt (F ) will be subject to a reduction max. metal foil according to Terminations: F = F x 2 x UAC / UDC max. r Tinned wire. if the DC operating voltage UDC is higher Marking: than 2 x UAC Marking: Black on Silver. 102 06.21-- 1000 pF -- 1500 pF -- 2200 pF -- 3300 pF -- 4700 pF -- 6800 pF -- 0,01 F -- 0,015 F -- 0.022 F -- 0.033 F -- 0.047 F -- 0.068 F 0.1 F -- 6800 pF -- -- 0.01 F -- 0.015 F PCM15 -- 0.022 F -- 1000 pF -- 1500 pF -- 2200 pF PCM 10 -- 3300 pF -- 4700 pF D WIMA MP 3-Y2 / 3R-Y2 Continuation General Data 250 VAC* 300 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 4 8.5 13.5 10 MPY20W1100FA00 5 13 19 15 MPRY2W1100FC00 1500 4 8.5 13.5 10 MPY20W1150FA00 5 13 19 15 MPRY2W1150FC00 2200 4 8.5 13.5 10 MPY20W1220FA00 5 13 19 15 MPRY2W1220FC00 3300 4 8.5 13.5 10 MPY20W1330FA00 5 13 19 15 MPRY2W1330FC00 4700 5 10 13.5 10 MPY20W1470FB00 6 14 19 15 MPRY2W1470FD00 6800 5 13 19 15 MPY20W1680FC00 7 15 19 15 MPRY2W1680FE00 0.01 mF 5 13 19 15 MPY20W2100FC00 8 17 19 15 MPRY2W2100FF00 0.015 6 14 19 15 MPY20W2150FD00 10 18 19 15 MPRY2W2150FG00 0.022 7 15 19 15 MPY20W2220FE00 8 20 28 22.5 MPRY2W2220FH00 0.033 8 20 28 22.5 MPRY2W2330FH00 0.047 10 22 28 22.5 MPRY2W2470FI00 12 24 28 22.5 MPRY2W2680FJ00 0.068 0.1 mF 13 25 33 27.5 MPRY2W3100FK00 * f = 50/60 Hz 10 ** PCM = Printed circuit module = pin spacing Z Upon request with long pins 35-2 mm max. 1 7 5 Dims. in mm. 3 W L 0.1 7 5 3 250 VAC H d = 0.6 P if PCM 10 0.01 d = 0.8 P if PCM 15 1135 730 57100 1000 f/MHz 6-2 Impedance change with frequency d PCM (general guide) at the pin exit points 10 (0.5) Z 300 VAC 1 7 5 3 Part number completion: Tolerance: 20 % = M 0.1 Packing: bulk = S 7 5 Pin length: 6-2 = SD 3 Taped version see page 161. 0.01 1135 730 57 100 1000 f/MHz Impedance change with frequency (general guide) Rights reserved to amend design data without prior notification. 103 06.21