Plugmold
Systems
Steel, Aluminum, and Nonmetallic Plugmold
Raceway and Multioutlet Assemblies
he selection of steel, aluminum, and nonmetallic
provides a versatile solution for many applications.
TPlugmold sections offer single or alternating circuits,
standard or isolated ground receptacles, and Snapicoil
harnesses of prewired receptacles or cord ended units.
Steel Plugmold comes in an ivory ScuffCoat or gray
enamel finish. The ScuffCoat finish is scratch resistant and
protects against nicks and chips while preventing color from
fading.
Aluminum Plugmold offers an attractive choice
for hospital and commercial labs. The finish offers high-tech
aesthetics and corrosion resistance.
Nonmetallic Plugmold has a textured ivory finish with
duplex receptacles. This series offers a field serviceable
surge module that protects the entire Plugmold strip and
Plugmold Systems come in a variety of finishes and configurations.
makes on-site changes easy.
Features & Benefits
Steel, aluminum, or nonmetallic material. Variety provides Single- and dual-gang boxes available. Wire devices into
choice for the application. the raceway system.
Many finishes. Ivory ScuffCoat finish or gray surface for steel, Field replaceable surge module. Replaces the module, not
aluminum satin anodized, and ivory nonmetallic textured finish. a receptacle (NM2000 Series only).
Compact, low profile appearance. Requires minimal space. Customization available. All products can be modified to
accommodate virtually any application.
Full range of fittings. Provides a complete wiring solution.
2400 Backfeed. Fitting helps installation over an existing
Single, alternating circuit, and isolated ground receptacles
wall box.
available. Meets virtually any job requirement.
Datacom connectivity options. Accepts industry standard
Variety of lengths. Ideal for different spaces.
and proprietary devices from a wide range of manufacturers
Choose receptacle spacing. Suits many applications.
to provide a seamless and aesthetically pleasing interface for
Snapicoil harnesses with different lengths and receptacle
voice, data, audio, and video applications at the point-of-use.
spacing. Offers a solution for many electrical requirements.
UL and cUL Listed. Safety and reliability in the applications.
Duplex receptacle. Aesthetically pleasing, functional 20A
cUL Listed 24S (2400) Series Plugmold. This 20A
duplex for the 24S (2400) Series.
version is cUL Listed.
Plugmold Systems shown in typical applications.
ED1025R7 Updated February 2005 For latest specs visit www.wiremold.comV/G 2000 Series
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
1 7/32"
Base and Cover Covers seam 2009 Ground Clamp For connection
[31mm]
between sections of 5400C. of equipment grounding conductor
ITEM CAT NO. LENGTH MATERIAL to provide additional ground
to raceway. Use with
Base V/G 2000B-5* 5' [1.5m] .040 Steel
V/G2000 Series.
Cover V/G 2000C* 5' [1.5m] .025 Steel
How 2009 is used.
Base & Cover V/G 2000BC* 5' [1.5m] .025 Steel
2"
V2003 Supporting Clip For temporary V2010B* Blank End Fitting For closing
[51mm]
2003 support, while positioning lengths G2010B* the open end of raceway.
of raceway base. Use with V/G Use with V/G 2000 Series.
2000 Series. V2003 has ivory
3/4"
finish, 2003 has plated finish.
[19.1mm]
V2051 Flush Plate Adapter For
W30 Pressure-Type Wire Connector feeding 2000 from an existing
For common connection of two, wall outlet. Equipped with 1/2"
1 5/16"
three, or four No. 12 or No.14 solid [12.7mm] threaded stud, toothed
[33mm]
copper conductors. Not for lockwasher for grounding, and
connection of equipment grounding conduit bushing.
4 1/2"
conductor. 300V maximum; 20A
[114mm]
60 C maximum. Not for use with
aluminum conductors.
2000WC Wire Clip Holds conductors
Plugmold 2000 2051H fastened to 2051H fastened to
2400WC in place in raceway.
extended from wall horizontally mounted vertically mounted
AL2000WC outlet using 2051H. wall box. wall box.
AL2400WC
NM2000WC V2011* 90 Flat Elbow For right
G2011* angle turns on same surface.
Cover stop permits neat
butting of 2000C Cover.
2001 Coupling For joining lengths
Two couplings furnished.
of 2000 Series Raceway Base. at
2 1/2"
any point [64mm]
Ea. Leg
2"
desired. Base come together. 2017TC Internal Corner Coupling
[51mm]
Furnished with one fiber bushing.
1 1/2"
[38mm]
V2006* Cover Clip For covering
3/4" 2017TC
G2006* joint where lengths of cover
[19.1mm]
or base adjoin. Use with
2017TC used as
1 1/2"
V/G 2000 Series.
a corner coupling.
[38mm] 2000B
2017TC
2017TC used as a
corner coupling and a
straight-through fitting.
V2010A3* Entrance End Offers larger
2000B
2 7/64"
G2010A3* capacity than V2010A2. 1/2"
[53mm]
trade size KOs on end, each
V2018C* External Elbow To continue
1 29/32"
side and bottom. 3/4" trade
[47mm]
G2018C* raceway runs around outside
size KOs on bottom and rear.
2 11/16"
corner. Fills the gap when
Includes ground screw. Use
[67mm]
external corner is made by
with V/G 2000 Series.
notching and bending the
2000 Base.
3 22/64"
[94mm]
Cover gap filler snapped
1 7/8"
[48mm] into place in 2018C.
V2010A2* 1 9/32" Entrance End For connecting
[58mm]
V2015* Tee For branches at right
G2010A2* V2000 with 1/2" conduit and
6"
1 1/2" G2015* angles. Couplings furnished.
armored cable connectors.
[152mm]
[38mm]
1/2" trade size KOs on end,
1 1/2"
each side and bottom.
[38mm]
Includes ground screw. Use
4"
2 1/8"
[102mm]
with V/G 2000 Series.
[54mm]
3"
[76mm]
* Use V prefix for Ivory finish and G prefix for Gray finish.
2